Kemper Amps Forum

I thought I could select any stored preset and then freely select a different amp, cab or whatever.
But the KPA showed only 5 available amps and cabs.

To read the manual was not very helpful to understand the concept.

The KPA can store stuff in different Levels:
Performance Level: (not available yet) seams to allow the user to organize and store groups of presets (for a performance or song)
Preset Level (KPA calles it Rig): All the presets include: the used profile (amp, cab), effect settings and other stuff like input settings...
Group Level: "Stomps" stores ALL settings for the effect Slots A,B,C,D. "Stacks" stores ALL settings for Amp, EQ, Cab. "Effects" stores ALL settings for the effect Slots X,Mod,Delay,Reverb
Module Level: Stores settings for an individual module (Input, A,B,C,D,Amp,EQ,CAB, X, Mod,Delay,Reverb)

Example:
We have two presets lets say a Marshall-Amp with a V30 Cab and a Fender-Amp with a Jensen Cab (each preset with its own effect settings).

If I like to create a new Preset with the Fender-Amp and the V30 Cab than I have to do this:
1. Load the Marshall-Amp preset
2. Select the CAB module
3. Press store
4. KPA asks if I want to store the full rig (preset) or the CAB alone -> I select CAB, choose a name e.g. "4x12 V30" and store it
5. Load the Fender-Amp preset
6. Select the CAB module
7. Browse the available presets (select the "4x12 V30)
8. Store the new preset with a new Name e.g. "Fender with V30"
done

Here is a nice video about all this:
http://www.youtube.com/watch?v=HRPV6wEB018

My own profiles are all tagged - this includes a name for the whole stack, amp, cab, cab type (e.g. 4x12) and used mic.

If your profiles does not contain this data - then you are lost.

In your case you could name it 'AC30 CAB' or whatever you like.