You are not logged in.

  • Login

S/PDIF management

Dear visitor, you are currently not logged in. Login or Register as a new user .

  • 1
  • 2

Rafport

Beginner

  • "Rafport" started this thread

Posts: 42

Location: Italy

  • Send private message

1

Thursday, January 5th 2012, 3:10pm

S/PDIF management

I would connect with S/PDIF my KPA to audio card, but just now it work just on 44.100 Khz (i don't know his work frequency, but i guess it's higher after some record try at different rate and loss at 44.100 are audible) and the output volume is very low, so i had to back to analog connection for a proper quality. Some feature at this level (Nova System for example has some setting to frequency rate and interpolation in digital connections) are needed in my opinion. Thanks!

tylerhb

Professional

Posts: 996

Location: Bremen, Germany

  • Send private message

2

Thursday, January 5th 2012, 4:18pm

the spdif input is not yet working at all. i hope this is on the priority list, since i need to get the reamping running asap.

Thx guys....

barnfield

Beginner

Posts: 2

Location: Cologne

  • Send private message

3

Thursday, January 5th 2012, 6:59pm

I would like to have the option to set the SPDIF in/outs to slave, so i don't have to switch my audiointerface for recording the Kemper Amp.

@rafport: The SPDIF output level depends on the master volume level. You have to push it to maximum.

schneidas

Master

Posts: 1,834

Location: Athens, Greece

  • Send private message

4

Thursday, January 5th 2012, 8:38pm

Do you get a signal at all through your S/Pdif connection?
I set the MV on 100% and the S/Pdif input on my soundcard on full - but I get no sound at all.
So I figured it just was not available with the current firmware (6900) yet...

barnfield

Beginner

Posts: 2

Location: Cologne

  • Send private message

5

Thursday, January 5th 2012, 9:40pm

Yes, i get a correct signal on SPDIF out (FW 6900)

Rafport

Beginner

  • "Rafport" started this thread

Posts: 42

Location: Italy

  • Send private message

6

Thursday, January 5th 2012, 10:39pm

my S/PDIF signal works but at fixed 44.100 Khz. The volume is very low, even putting master at max it's half of what should be and quality of the tone is very bad. The fact someone reach and someone not make me think it's a feature that need lot of work (and i hope big improvements)

schneidas

Master

Posts: 1,834

Location: Athens, Greece

  • Send private message

7

Thursday, January 5th 2012, 10:46pm

Ok I get no signal at all.
Would be cool to hear some official info on this

GeneAndEddy

Intermediate

Posts: 273

  • Send private message

8

Friday, January 6th 2012, 9:17am

That's odd, SPDIF output is working fine for me.
Haven't tried the input yet.

schneidas

Master

Posts: 1,834

Location: Athens, Greece

  • Send private message

9

Friday, January 6th 2012, 11:24am

Ok, I tried and tried with the S/Pdif out on the KPA today.
Gain maxed out, volume maxed out, MV maxed out - everything super hot.. no signal gets to my soundcard.

Is there a digital out volume I'm missing somewhere hidden in the KPA menu?

guitarnet70

Sage

Posts: 6,315

Location: Denzlingen, Germany

  • Send private message

10

Friday, January 6th 2012, 11:45am

Quoted from "schneidas"

Ok, I tried and tried with the S/Pdif out on the KPA today.
Gain maxed out, volume maxed out, MV maxed out - everything super hot.. no signal gets to my soundcard.

Is there a digital out volume I'm missing somewhere hidden in the KPA menu?
Not that I know, you have global eq for monitor and main and you have global level for monitor and headphone...a question for tech support
  • 1
  • 2