You are not logged in.
Dear visitor, you are currently not logged in. Login or Register as a new user .
Thursday, February 9th 2012, 4:05am
Noob needs MIDI-HELP
Hey Guys.
I want to use my Guitar Rig 3 Kontrol Pedal Board as a Midi Kontroller for my shiny new Kemper Amp (which hands Native Instruments their asses in a very smooth and dynamic way
)
Anyhow, I just cant seem to get it to work.
What I want to do is to set the Amp up in a way, that it loads a certain Preset (like the "Boogie" for example) when I stomp button number one. If I stomp button Number 2 it should load another preset (something Crunchy). Button Number 3 should aktivate a Volume-Boost and a slight Reverb (on all presets) and Button number 4 should activate a crystal clear clean mode.
Anyway, I always enter the System Menue and appy my current sound to a certain CC Numer, like 80 for example. But when i switch the channel and stomp the Button applied to CC # 80 Nothing happens.
What am I doing wrong? Am I missing something? Is there a tutorial for dummies on how to apply midi to the Kemper? I never worked with midi before.
I want to use my Guitar Rig 3 Kontrol Pedal Board as a Midi Kontroller for my shiny new Kemper Amp (which hands Native Instruments their asses in a very smooth and dynamic way
)Anyhow, I just cant seem to get it to work.
What I want to do is to set the Amp up in a way, that it loads a certain Preset (like the "Boogie" for example) when I stomp button number one. If I stomp button Number 2 it should load another preset (something Crunchy). Button Number 3 should aktivate a Volume-Boost and a slight Reverb (on all presets) and Button number 4 should activate a crystal clear clean mode.
Anyway, I always enter the System Menue and appy my current sound to a certain CC Numer, like 80 for example. But when i switch the channel and stomp the Button applied to CC # 80 Nothing happens.
What am I doing wrong? Am I missing something? Is there a tutorial for dummies on how to apply midi to the Kemper? I never worked with midi before.
Thursday, February 9th 2012, 10:46am
Load the Rig - go to System/midisettings - set prgchg number, push assign - there you go.
Ansonsten gilt, wer lesen kann ist eindeutig im Vorteil !!!
aus dem Reference Manual Seite 45:
Operation of a MIDI remote pedal
The Kemper Profiling Amplifier connects easily to MIDI remote pedals from any manufacturer. Simply connect your MIDI pedal to the MIDI IN jack of the KPA. There are three groups of MIDI messages that the KPA can receive:
♦♦
Program Change
You can assign up to 128 program change numbers to your Rigs. The assignment is done in the SYSTEM Menu/Program # Assign.
Aber wer schlägt sich schon mit nem Referencemanual rum, wenn sich andere schon die Mühe gemacht haben
- frei nach Guttenberg ! 
Aber wir sind ja nicht so.
Ansonsten gilt, wer lesen kann ist eindeutig im Vorteil !!!
aus dem Reference Manual Seite 45:
Operation of a MIDI remote pedal
The Kemper Profiling Amplifier connects easily to MIDI remote pedals from any manufacturer. Simply connect your MIDI pedal to the MIDI IN jack of the KPA. There are three groups of MIDI messages that the KPA can receive:
♦♦
Program Change
You can assign up to 128 program change numbers to your Rigs. The assignment is done in the SYSTEM Menu/Program # Assign.
Aber wer schlägt sich schon mit nem Referencemanual rum, wenn sich andere schon die Mühe gemacht haben
- frei nach Guttenberg ! Aber wir sind ja nicht so.
) 
Thursday, February 9th 2012, 12:21pm
I kind of mixed up the PC and the CC numbers, but that wasnt the problem
It seem like the Kemper always one-ups the PC number send by the controll unit. For example, if I want the rig thats assigned to pc80 my pedalboard must send pc79 and so on.
How can that be?
It seem like the Kemper always one-ups the PC number send by the controll unit. For example, if I want the rig thats assigned to pc80 my pedalboard must send pc79 and so on.
How can that be?
Thursday, February 9th 2012, 12:49pm
Probably your pedalboard starts the PC count by 0, the old ART midi controllers were the same...I kind of mixed up the PC and the CC numbers, but that wasnt the problem
It seem like the Kemper always one-ups the PC number send by the controll unit. For example, if I want the rig thats assigned to pc80 my pedalboard must send pc79 and so on.
How can that be?
"Music is enough for a lifetime, but a lifetime is not enough for music" Serghei Rachmaninoff
Similar threads
-
Problems and trouble shooting help »-
Switching Sounds and Wah Pedal
(Jan 16th 2012, 9:07am)
-
- Problems and trouble shooting help »
-
Solved - Midi Problem
(Jan 21st 2012, 10:42am)
-
- Kemper Profiler related discussions »
-
Noob questions
(Jan 20th 2012, 11:19am)
-
- Questions and answers about Kemper Profiler »
-
MIDI Settings
(Jan 14th 2012, 3:22pm)