Yesterday i arranged a new performance an filled the slot with a few amps. After saving it, i have the right amp soundwise, but the slot displays my clean sound?! I selected another amp for that slot - no difference. What have i done wrong?!
Wrong Amp as selected in Performance Mode-Slot
- janus
- Closed
- Thread is marked as Resolved.
-
I've had the same issue. Performance mode seems to remember the First Amp inserted when saved. If you change the amp it shows up on the main display but not in the slots.
-
You just have to go to "arrange slots" and load the name from profile or change it to your liking manually
-
If you load a new profile in a slot that already contained a profile the new profile gets loaded and will be saved correctly when you press "Store" 3 times. The displays shows still the name of the former loaded profile, so do a rename or something like TKustom described.
Actually the Performance Mode has got a bug that sometimes let the KPA "forget" your stored profiles. In this case the slot shows "Initialised rig". According to the guys at Kemper's this bug will be solved with next firmware-update. -
That´s it. Thank you very much.
-
Actually the Performance Mode has got a bug that sometimes let the KPA "forget" your stored profiles. In this case the slot shows "Initialised rig". According to the guys at Kemper's this bug will be solved with next firmware-update.
This happened to me. Do you know how to restore the missing rig in the corresponding slot?
-
This happened to me. Do you know how to restore the missing rig in the corresponding slot?
Simply switch to another slot and wait 30 seconds or so.
Go back to the initial slot and your rig will be there again. -
It happened with me a few times...
Very unpleasant in live situation....
When it would be resolved? -
This happened to me. Do you know how to restore the missing rig in the corresponding slot?
Switch to a different bank (performance) and back, that fixes it for me. I see this happen consistently the first time the KPA is switched to performance-mode after booting to browse-mode. One or more of patches in the bank that first is opened are missing their rig. Switching to a different bank and back fixes the problem.
-
Thank you both!
