Wolfborne Rig

Hey guys, I'm new to the forums but wanted to share what we're using for our live sound. This photo was taken at rehearsal so it's a bit of a tight fit but ever since we've switched to Kemper our lives have been much better!

[Blocked Image: http://i259.photobucket.com/albums/hh319/lanningkann/Guitar%20Photos/27913_357014501096599_1324955027_n_zps6719d95e.jpg]

I am on the far side into the Splawn 4X12 with 55watt Small Blocks and Cody is into the Mesa w V30s... Our signal path is guitar, into the Kemper. The rear outputs are DI to an Allen & Heath WZ3 - 12M monitor board and then it splits to FOH and AT M2 IEMs. The monitor outs have cabinet disabled and they both go to a rack mounted Crown digital power amp behind the backline. Since the power amp is stereo we each use a side. Then the outs of the power amp go back to our 4X12s. We have the monitor volumes unlinked in the Output section of the Kemper so we can adjust our stage fill individually without effecting the FOH signal. We don't mic the cabs. Those are just used for fill and so we can feel them to supplement the IEM system.

Thanks for the welcome. Here is a song from my band. Our debut album isn't out yet. Still working on that release which should be before Thanksgiving. Thanks for checking us out! For the main tones on this tune we used real amps and then it was all profiled.

My main tone is an Orange Rockerverb 100, Soldano Hotrod 50+ and a modded JCM800. Our other guitarist's tone is a older Mesa Dual Rec and a Laney Clipp. Our profiles are all blended from multiple amps at a time.

Here is a photo of how we had our cabs mic'd for the actual recording and of the control room so you can see the some of the amps we used.

[Blocked Image: http://i259.photobucket.com/albums/hh319/lanningkann/Wolfborne%20The%20Farm%202013/525189_155612581273238_1968820202_n_zps42c7ffe5.jpg]

[Blocked Image: http://i259.photobucket.com/albums/hh319/lanningkann/Wolfborne%20The%20Farm%202013/541517_155613024606527_1308944377_n_zps2d24f30b.jpg]

In this one my Splawn Nitro is also shown but we didn't use it. It didn't fit the tone we were looking for. Actually my profiler has replaced the Nitro completely lol.

[Blocked Image: http://i259.photobucket.com/albums/hh319/lanningkann/Wolfborne%20The%20Farm%202013/12656_155612344606595_672918246_n_zps646f8257.jpg]

Here is a pic of our engineer's Kemper. I didn't believe it was as good as he said it was. He was turned onto them when he did the new Biffy Clyro album as they use them and he had to profile all their rigs for them, so he got one for that purpose. So he profiled our studio rigs and then I got to try it before I bought one. We ordered 2 of them the next day! It was that amazing. The Kemper is the be-all-end-all device. I had an AxeFx before and this kills it hands down.

[Blocked Image: http://i259.photobucket.com/albums/hh319/lanningkann/Wolfborne%20The%20Farm%202013/20130424_134518_zpsac013461.jpg]

Here is the 72 channel SSL we used which also contributed to that awesome tone!
[Blocked Image: http://i259.photobucket.com/albums/hh319/lanningkann/Wolfborne%20The%20Farm%202013/20130401_181348_zps24d1cb7b.jpg]