I haven't checked this for a while because I haven't played with one of my bands for some time, but apparently since firmware 2.2.0 whenever I select a performance slot which uses the FX Loop the KPA resets the Direct Out in the Master section to "Git+Processing".
In previous firmwares, when I selected a performance slot without FX Loop the Direct Out got back to what I had selected in the Master section ("Off" in my case). That's a problem because I have a talk box in the FX Loop that now gets turned on after the first time I use it until I manually turn it off, which is very annoying (the tube coming out of the Talkbox is right next to my mic and very loud).
Does anyone know if there's a workaround for this? Or when it will be fixed?
If you want to reproduce the problem:
1. Go to the master section and turn "Direct Output" to "Off"
2. Select performance mode
3. Create a slot with the FX Loop engaged
4. Create a slot without FX Loop
5. Select the slot with FX Loop (I use a MIDI footswitch)
6. Select the slot without the FX Loop
7. Check the master section, Direct Out should now be set to "Git+Processing"