Hey guys!
I'm really having some troubles with my profiler lately. All the profiles I did (high gain) sound totally phasey and also extremely muddy in the low end. Never had those problems before and I'm doing everything just as I always did! Also all my previous made DI profiles sound horrible! Like a pitch shifter is glitching away constantly. This also gets worse the harder I play. Its virtually non existant if I roll down my volume poti and pick lightly. If I pick harder and roll the volume poti up it gets worse and worse. This only occurs if the "monitor cab OFF" checkbox is checked and only on the powered output. The DI signal always sounds normal if I monitor it through the DAW via S/PDIF.
I also tried to profile my 6505 recently and constantly got the message "noise gate detected" even though there's definitely no noise gate in the signal chain. On the red channel I then always got the message "external amp to noisy" and that I should turn down the gain... The 6505 is noisy allright, but I should be able to make a decent profile with gain on 2,5 of 10, shouldn't I? I also recall that I profiled this amp before, even with higher gain settings. Totally weird right? I attach some sound samples for you guys to listen to.
https://dl.dropboxusercontent.…ier%20Reference%20Amp.mp3
https://dl.dropboxusercontent.…ofile%20non%20refined.mp3
https://dl.dropboxusercontent.…r%20Profile%20refined.mp3
