Ok, admittedly Im not a whiz at this whole programming thing.
I had purchased a FCB1010 used and it came with the uno chip.
I have done as much reading as i think i can on the subject of setting it up with the FCB1010 MIDI Editor version 2.99-2.
After weeks of trying, still, have no clue what Im doing.
Does anyone have a sysex file I can have?
Would that even work? 
Im not trying to beg but, I would like to be able to control my Kemper and not feel like i wasted the money on the FCB1010.
What kind of problems are you having? Is it the stock UNO software or the one made for the KPA. I've been using mine for 3 years with no issue
Which editor are you using?
I have the best experience with the one from lg-FCB which makes programming the UnO VERY easy..
FCB1010 MIDI Editor version 2.99-2.
Im going to try the lg-FCB now that you mention it.
That's probably the best approach.
Keep us posted.
Eh that's odd.
With the lg editor you should be able to get good support by Xavier though.
I take it that's not the Uno4Kemper chip, just the regular Uno chip. That might explain why it wouldn't sync with Xavier's programme and why it isn't just plug and play. You should try out the Uno4Kemper one before junking the FCB1010.
If you're using the UnO4Kemper chip, read this manual (page 4 in particular): http://www.uno4kemper.com/UnOforKemper_manual_1_3.pdf
I take it that's not the Uno4Kemper chip, just the regular Uno chip. That might explain why it wouldn't sync with Xavier's programme and why it isn't just plug and play. You should try out the Uno4Kemper one before junking the FCB1010.
that's why I recommended the lg-FCB editor which works great with the UnO chip. I have owned and used it (Software and chip). Still do, but not at the moment (Uno4K here) 
that's why I recommended the lg-FCB editor which works great with the UnO chip. I have owned and used it (Software and chip). Still do, but not at the moment (Uno4K here)
So you did! I'm not too familiar with the FCB, I assumed that the Ig-FCB editor was only for the Uno4Kemper chip. 
So you did! I'm not too familiar with the FCB, I assumed that the Ig-FCB editor was only for the Uno4Kemper chip.
Ha, no.
The UnO4K is so pre-configured, it doesn't have an editor, doesn't need one, too. 
Sorry for the off topic guys, but it seems the only topic about it. I've been using the FCB1010 with my Kemper, and everything works fine.
When i switch patches though (from a clean sound to a distorted sound, for example) i've a little amount of latency from the moment i press the pedal on the fcb and the real patch change. Anyone know how to help?
