Have amps, will profile the BE100: choose a single mic

  • If you want to profile the BE100 with a single mic vote for single mic and the mic that you want to use. 17

    1. I want to profile with a single mic (6) 35%
    2. Shure SM57 (14) 82%
    3. Audix i5 (0) 0%
    4. Sennheiser e609 (1) 6%
    5. Sennheiser e906 (3) 18%
    6. Audio Technica AT4040 (0) 0%
    7. Audio Technica AT4041 (1) 6%

    As a followup to this thread: http://<a href="http://www.kemper-amps.com/forum/index.php/Thread/17833-Have-amps-will-profile-Choose-an-amp/?postID=188588#post188588">Have amps, will profile: Choose an amp.</a>


    If you want to profile the BE100 with a single mic please vote for "I want to profile with a single mic" and the mic that you want to use, otherwise vote in the dual mic pole. We will select the winner from the "I want to profile with a single mic" or "I want to profile with a dual mics".


    Here's a brief description of each mic...


    Shure SM57: You all know what it is, nothing more to say.
    Audix i5: This is actually a nice mic for the money, it has a bit more low end and high end than the SM57.
    Sennheiser e609: This is a flat faced mic, once of those that you drape in front of the amp. Some say the high end is a bit brittle.
    Sennheiser e906: Same as the e609 except that it has a high pass or low pass filter switch.
    Audio Technica AT4040: This is a large diaphragm condenser mic, since I don't have a ribbon this would probably be the next best choice in a dual mic setup.
    Audio Technica AT4041: This is a condenser mic.


    If you don't know about these mics I would urge you to research them before voting as the mic has a huge impact on the profile.

    Edited 2 times, last by timowens ().