Have amps, will profile the BE100: choose dual mics

As a followup to this thread: http://<a href="http://www.kemper-amps.com/forum/index.php/Thread/17833-Have-amps-will-profile-Choose-an-amp/?postID=188588#post188588">Have amps, will profile: Choose an amp.</a>

If you want to profile the BE100 with a dual mics please vote for "I want to profile with dual mics" and the two mics that you want to use, otherwise vote in the single mic pole. We will select the winner from the "I want to profile with a single mic" or "I want to profile with a dual mics".

Here's a brief description of each mic...

Shure SM57: You all know what it is, nothing more to say.
Audix i5: This is actually a nice mic for the money, it has a bit more low end and high end than the SM57.
Sennheiser e609: This is a flat faced mic, once of those that you drape in front of the amp. Some say the high end is a bit brittle.
Sennheiser e906: Same as the e609 except that it has a high pass or low pass filter switch.
Audio Technica AT4040: This is a large diaphragm condenser mic, since I don't have a ribbon this would probably be the next best choice in a dual mic setup.
Audio Technica AT4041: This is a condenser mic.

If you don't know about these mics I would urge you to research them before voting as the mic has a huge impact on the profile.