Rotary speed with the Remote ?

How about searching the manual?

Quote from reznor

Hi,
been searching the forum for a way to change rotary speed with an expression pedal connected to the remote...
any ideas ?
thanks

The Factory 3.0 version of "CK Rotary Speaker" has the Rotation Speed parameter auto-assigned to Remote Button IIII

Understood. An expression pedal would act just like a switch, though:

The Rotary Speed parameter has two settings: fast and slow (like a real leslie). If you used an expression pedal, it wouldn't give you a continuous control over the speed.

The MIDI manual doesn't apply to the Remote(yet?). I hope the Remote pedals and switches will eventually be able to control any parameter that we want to control

Maybe, when the switch functions are added to the Remote, you can assign a Switch function to a connected pedal.

Look at the 3.0 CK Rotary - if nothing else, copy everything else in from your rig, and use the pedal assignment in that rig

You're welcome

@reznor

I figured it out! The manual implies how The Remote "learns" switch assignments - it occurred to me what that must mean for Rotary Speed.

Go to a rig with a Rotary Speaker effect (or add one as an experiment).

Press the MOD button, so you can see the first page of Rotary speaker parameters.

Press a Remote switch, holding it down.

Press the Soft Button above "Rotation Speed".

You will see the Remote Display has been updated to show the assignment.

Push the Remote Switch - the rotary will change speed.

SAVE your rig with the Speed you want when the rig is activated.

Quote from reznor

now that's what i couldn't find in the manual, can you tell me on what page in the manual you found the solution ?

@reznor

The manual didn't specifically say HOW to do it. I just said to myself "If I programmed the slots to work that way, how would I program the rotary Speed switch to work?" As it turns out, I was right

EDIT: This the mention from the 3.0 version of the Reference Manual - I just found it on page 108:

Besides toggling the status of stomps and effects, each of the Effect buttons can also be used to trigger so-called "Action & Freeze" functions. Currently, there is one of these functions available: "Rotary Speaker (slow/fast)". We have many more under development.

Paul, I assume you have allready received your remote ????

Ohio is ever so slightly closer to Colorado than Michigan

Are you one of the Monday deliveries? (There are too many of those remote threads to keep it all straight....)

Nope mine is to ship on the 23rd

Quote from paults

@reznor

I figured it out! The manual implies how The Remote "learns" switch assignments - it occurred to me what that must mean for Rotary Speed.

Go to a rig with a Rotary Speaker effect (or add one as an experiment).

Press the MOD button, so you can see the first page of Rotary speaker parameters.

Press a Remote switch, holding it down.

Press the Soft Button above "Rotation Speed".

You will see the Remote Display has been updated to show the assignment.

Push the Remote Switch - the rotary will change speed.

SAVE your rig with the Speed you want when the rig is activated.

Display More

But how is itpossible, to use f.e. a performance-slot without rotary, then push a effect-button on the remote to activate the rotary effect and then push another effect-button to change speed. (this is the usual way for a guitarist to activate a leslie and the change speed). I don't see how that can be realized in the present configuration (and it is not described in the manual).

Quote from Hurricane

[
But how is itpossible, to use f.e. a performance-slot without rotary, then push a effect-button on the remote to activate the rotary effect and then push another effect-button to change speed. (this is the usual way for a guitarist to activate a leslie and the change speed). I don't see how that can be realized in the present configuration (and it is not described in the manual).

Easy.
1. Assign one of the switches I-IIII to the rotary on/off
2. Assign another one to slow/fast
by following the usual procedure pressing the swich on the remote and the switch on the profiler simultaneously.