Only midi? No USB?
KPAEditor Community Project(vst, standalone, win, mac , linux ) - based on http://ctrlr.org/ .
- DamianGreda
- Thread is marked as Resolved.
-
-
Thanks DamianGreda (and all the others) for the hard work!
I finally tested how the two-way MIDI communication work if there are more parameters (and more parameter requests):
(It is a little laggy when I set the "parameter request interval" to 50 ms and turn the knobs on Kemper)
-
Thanks DamianGreda (and all the others) for the hard work!
I finally tested how the two-way MIDI communication work if there are more parameters (and more parameter requests):
Very cool! Is there a way to control the parameters of the stomp modules?
-
Very cool! Is there a way to control the parameters of the stomp modules?
I haven't tested it yet, but it should be possible -> there's a Ctrlr panel (KPA Stomps panel) in post #1, but I cannot find a working download link.
-
Current Stomp types
(I browsed through all stomps and sent F0 00 20 33 02 7f 41 00 32 00 00 00 F7 to request the current stomp type in Stomp slot A)Code
Display MoreSingle parameter request (Stomp A type) F0 00 20 33 02 7f 41 00 32 00 00 00 F7 Response f0 00 20 33 00 00 01 00 32 00 00 00 f7 - empty - f0 00 20 33 00 00 01 00 32 00 01 12 f7 Single Delay f0 00 20 33 00 00 01 00 32 00 01 13 f7 Dual Delay f0 00 20 33 00 00 01 00 32 00 01 14 f7 TwoTap Delay f0 00 20 33 00 00 01 00 32 00 01 15 f7 Serial TwoTap Delay f0 00 20 33 00 00 01 00 32 00 01 21 f7 Rhythm Delay f0 00 20 33 00 00 01 00 32 00 01 24 f7 Quad Delay f0 00 20 33 00 00 01 00 32 00 01 11 f7 Legacy Delay f0 00 20 33 00 00 01 00 32 00 01 16 f7 Crystal Delay f0 00 20 33 00 00 01 00 32 00 01 17 f7 Loop Pitch Delay f0 00 20 33 00 00 01 00 32 00 01 18 f7 Freq Shifter Delay f0 00 20 33 00 00 01 00 32 00 01 09 f7 Dual Chromatic f0 00 20 33 00 00 01 00 32 00 01 0a f7 Dual Harmonic f0 00 20 33 00 00 01 00 32 00 01 0b f7 Dual Crystal f0 00 20 33 00 00 01 00 32 00 01 0c f7 Dual Loop Pitch f0 00 20 33 00 00 01 00 32 00 01 22 f7 Melody Chromatic f0 00 20 33 00 00 01 00 32 00 01 23 f7 Melody Harmonic f0 00 20 33 00 00 01 00 32 00 01 25 f7 Quad Chromatic f0 00 20 33 00 00 01 00 32 00 01 26 f7 Quad Harmonic f0 00 20 33 00 00 01 00 32 00 00 01 f7 Wah Wah f0 00 20 33 00 00 01 00 32 00 00 02 f7 Wah Low Pass f0 00 20 33 00 00 01 00 32 00 00 03 f7 Wah High Pass f0 00 20 33 00 00 01 00 32 00 00 04 f7 Wah Vowel Filter f0 00 20 33 00 00 01 00 32 00 00 06 f7 Wah Phaser f0 00 20 33 00 00 01 00 32 00 00 07 f7 Wah Flanger f0 00 20 33 00 00 01 00 32 00 00 08 f7 Wah Rate Reducer f0 00 20 33 00 00 01 00 32 00 00 09 f7 Wah Ring Modulator f0 00 20 33 00 00 01 00 32 00 00 0a f7 Wah Freq Shifter f0 00 20 33 00 00 01 00 32 00 00 0c f7 Wah Formant Shifter f0 00 20 33 00 00 01 00 32 00 00 11 f7 Bit Shaper f0 00 20 33 00 00 01 00 32 00 00 12 f7 Recti Shaper f0 00 20 33 00 00 01 00 32 00 00 13 f7 Soft Shaper f0 00 20 33 00 00 01 00 32 00 00 14 f7 Hard Shaper f0 00 20 33 00 00 01 00 32 00 00 15 f7 Wave Shaper f0 00 20 33 00 00 01 00 32 00 00 21 f7 Green Scream f0 00 20 33 00 00 01 00 32 00 00 22 f7 Plus DS f0 00 20 33 00 00 01 00 32 00 00 23 f7 One DS f0 00 20 33 00 00 01 00 32 00 00 24 f7 Muffin f0 00 20 33 00 00 01 00 32 00 00 25 f7 Mouse f0 00 20 33 00 00 01 00 32 00 00 26 f7 Fuzz DS f0 00 20 33 00 00 01 00 32 00 00 27 f7 Metal DS f0 00 20 33 00 00 01 00 32 00 00 71 f7 Treble Booster f0 00 20 33 00 00 01 00 32 00 00 72 f7 Lead Booster f0 00 20 33 00 00 01 00 32 00 00 73 f7 Pure Booster f0 00 20 33 00 00 01 00 32 00 00 74 f7 Wah Pedal Booster f0 00 20 33 00 00 01 00 32 00 00 61 f7 Graphic Equalizer f0 00 20 33 00 00 01 00 32 00 00 62 f7 Studio Equalizer f0 00 20 33 00 00 01 00 32 00 00 63 f7 Metal Equalizer f0 00 20 33 00 00 01 00 32 00 00 65 f7 Stereo Widener f0 00 20 33 00 00 01 00 32 00 00 31 f7 Compressor f0 00 20 33 00 00 01 00 32 00 00 39 f7 Noise Gate 2:1 f0 00 20 33 00 00 01 00 32 00 00 3a f7 Noise Gate 4:1 f0 00 20 33 00 00 01 00 32 00 00 41 f7 Vintage Chorus f0 00 20 33 00 00 01 00 32 00 00 42 f7 Hyper Chorus f0 00 20 33 00 00 01 00 32 00 00 43 f7 Air Chorus f0 00 20 33 00 00 01 00 32 00 00 47 f7 Micro Pitch f0 00 20 33 00 00 01 00 32 00 00 44 f7 Vibrato f0 00 20 33 00 00 01 00 32 00 00 45 f7 Rotary Speaker f0 00 20 33 00 00 01 00 32 00 00 46 f7 Tremolo f0 00 20 33 00 00 01 00 32 00 00 51 f7 Phaser f0 00 20 33 00 00 01 00 32 00 00 52 f7 Phaser Vibe f0 00 20 33 00 00 01 00 32 00 00 53 f7 Phaser Oneway f0 00 20 33 00 00 01 00 32 00 00 59 f7 Flanger f0 00 20 33 00 00 01 00 32 00 00 5b f7 Flanger Oneway f0 00 20 33 00 00 01 00 32 00 00 40 f7 Space f0 00 20 33 00 00 01 00 32 00 01 01 f7 Transpose f0 00 20 33 00 00 01 00 32 00 00 0b f7 Pedal Pitch f0 00 20 33 00 00 01 00 32 00 00 0d f7 Pedal Vinyl Stop f0 00 20 33 00 00 01 00 32 00 01 02 f7 Chromatic Pitch f0 00 20 33 00 00 01 00 32 00 01 03 f7 Harmonic Pitch f0 00 20 33 00 00 01 00 32 00 01 04 f7 Analog Octaver f0 00 20 33 00 00 01 00 32 00 00 79 f7 Loop Mono f0 00 20 33 00 00 01 00 32 00 00 7a f7 Loop Stereo f0 00 20 33 00 00 01 00 32 00 00 7b f7 Loop Distortion
Example: send F0 00 20 33 02 7f 01 00 32 00 01 12 F7 to set "Single Delay" to Stomp A slot
- $F0: SYX
- $00 $20 $33: Access/Kemper Manufacturer ID
- $02: Product Type $02 = Kemper Profiler
- $7f: Device ID $7f = OMNI
- $01: The function code for a single parameter change is $01
- $00: Addresses the instance of the parameter (always 0)
- $32: Controller MSB (MSB of Stomp A address page in this example)
- $00: Controller LSB (LSB of Stomp A address page in this example)
- $01: Value MSB (Single Delay in this example)
- $12: Value LSB (Single Delay in this example)
- $F7: End of Sysex
-
Too much msb/lsb value mapping difficulties with "combobox" component...maybe a popup menu would be better for selecting FXs:
-
Was interested in downloading this and using to control the Kemper. The thread is kind of old so I wanted to make sure that it was still a working version and not a dead project. Can anybody verify still working in windows?
-
love it
-
Is this still available and usable in current form? Download links are dead.
Happy to test.
-
Recently I had a conversation with Damian (OP) and he is sending greetings to all KPA forum users together with small surprise!
KPA FX EDITOR for quick fun with delays (and all KPA fx's) on windows via MIDI.
[Blocked Image: https://www.dropbox.com/s/1ct7…A_FX_EDITOR_1_0.jpg?raw=1]
MANUAL: Connect KPA MIDI IN And OUT with your MIDI interface. Open a program or bpanelz with ctrlr (from ctrlr.org) and from MIDI menu select Input , Controller , Output Device (select your MIDI interface) . Then Click to Connect and select slot witch you want to edit. You can select "fx type" then or select fx type with browse knob on KPA.
---------------------------------------DOWNLOADS--------------------------------------------
WINDOWS EXECUTABLE:
https://www.dropbox.com/s/nes3…PA_FX_EDITOR_1_0.rar?dl=0BPANELZ to open(on MAC and WIN) with ctrlr from ctrlr.org
https://www.dropbox.com/s/d9vd…X_EDITOR_1_0.bpanelz?dl=0
------------------------------------------------------------------------------------------------------EDIT1 01.03: Fixed missing knobs images. If there is no knobs on windows 7 or 10 delete folder c:\users\"yourusername"\AppData\Roaming\KPA_FX_EDITOR
EDIT2 07.03.2018: Feedback from KPA now working (use "Click To Connect" button)EDIT3 08.03.2018:Reverb added. Fixed some bugs with connection. I have to find a way to display values like in KPA.
EDIT4 09.03.2018:Added live feedback for Reverb. Fixed Rate and Feedback knob.Future updates to this you can find here: https://www.facebook.com/group…rmalink/1717834381570596/
-
Recently I had a conversation with Damian (OP) and he is sending greetings to all KPA forum users together with small surprise!
KPA FX EDITOR for quick fun with delays (and all KPA fx's) on windows via MIDI. Still a lot of work on this.
It's still buggy as hell so use at your own risk.(in any case just reset the KPA)[Blocked Image: https://photos-4.dropbox.com/t…ize=2048x1536&size_mode=3]
MANUAL: Connect KPA MIDI IN And OUT with your MIDI interface. Open a program or bpanelz with ctrlr (from ctrlr.org) and from MIDI menu select Input , Controller , Output Device (select your MIDI interface) . Then Click to Connect and select slot witch you want to edit. You can select "fx type" then or select fx type with browse knob on KPA.
---------------------------------------DOWNLOADS--------------------------------------------
WINDOWS EXECUTABLE:
https://www.dropbox.com/s/nes3…PA_FX_EDITOR_1_0.rar?dl=0BPANELZ to open(on MAC and WIN) with ctrlr from ctrlr.org
https://www.dropbox.com/s/d9vd…X_EDITOR_1_0.bpanelz?dl=0
------------------------------------------------------------------------------------------------------EDIT1 01.03: Fixed missing knobs images. If there is no knobs on windows 7 or 10 delete folder c:\users\"yourusername"\AppData\Roaming\KPA_FX_EDITOR
EDIT2 07.03.2018: Feedback from KPA now working (use "Click To Connect" button)EDIT3 08.03.2018:Reverb added. Fixed some bugs with connection. I have to find a way to display values like in KPA.
EDIT4 09.03.2018:Added live feedback for Reverb. Fixed Rate and Feedback knob.Future updates to this you can find here: https://www.facebook.com/group…rmalink/1717834381570596/
really awesome, this kind of midi controller and editor is so sweet, time to search for a PC USB midi cable!
-
The link to the KPA panel is dead...
Any chance of getting it back again?
Thanks -
The link to the KPA panel is dead...
Any chance of getting it back again?
ThanksI checked both links and files downloaded just fine...
-
really awesome, this kind of midi controller and editor is so sweet, time to search for a PC USB midi cable!
Yes, it’s awesome. Finally an easy and convenient way to set up the «new» delays. It’s a pity Kemper can’t be bothered to add this functionality to RigManager, though.
-
Previous link to screenshot was not working, so here you go:
[Blocked Image: https://www.dropbox.com/s/1ct7igli5oqudjs/KPA_FX_EDITOR_1_0.jpg?raw=1]
-
Hate to ask but is there a "Mac" version of this lil Jem?
-
Hate to ask but is there a "Mac" version of this lil Jem?
Hi spikey,
maybe you missed this from the post:BPANELZ to open(on MAC and WIN) with ctrlr from ctrlr.org
dropbox.com/s/d9vdf2gzg64o543/KPA_FX_EDITOR_1_0.bpanelz?dl=0 -
Now updated with Robotalk and user scales.
-
Hi spikey,maybe you missed this from the post:
BPANELZ to open(on MAC and WIN) with ctrlr from ctrlr.org
dropbox.com/s/d9vdf2gzg64o543/KPA_FX_EDITOR_1_0.bpanelz?dl=0Yep I did- Thanks! Now if I can figure out how to errr... I think the RTFM idea above applies now !! This looks AWESOME!!!
-
Get this: http://ctrlr.org/nightly/Ctrlr-5.3.198.dmg and install it.
Open installed Ctrlr program.If you get security warning when launching, do this:Control-click the app icon and click Open, then click button Open.
Download this: https://www.dropbox.com/s/d9vd…X_EDITOR_1_0.bpanelz?dl=0
and open it in Ctrlr app.