Can I use my Ernie Ball Volume pedals as expression pedals?

A friend of mine lent me his ernie ball expression pedal when I first got my remote.I'm not sure what one it was but It was silver, big and quite heavy. I couldnt get it to work though

Yep you have to use a TRS with the remote and an expression pedal I use the Dunlop DVP-3 and they work great

Not a problem we have all been there

Quote from Corey1213

would I need stereo cables that branch off into ring and tip cables for the volume pedals?

Yes, to use a Volume pedal for an Expression pedal, you are correct - that is the cable you need for each pedal.

http://www.strymon.net/2011/10…l-as-an-expression-pedal/

They will not have a linear range, but will work was an expression pedal. If you like the feel, of them, they will be fine.

There are some very good wah sounds in the Kemper - there is a thread dedicated to many of them. They can be very effectively tweaked, too.

Hi,

Just the Jr model of EB work with the 47k pot inside
if you want to use the larger model, you have to exchange the 250k pot with a 47k : it's not very easy, but i just do it, it works fine for volume and expression.

hope this helps !

There are two Junior models: 250K and 25K.
I have the 25K and it works great.
If your is 250K you should change the pot.

Yes it works nice. However, since I discovered the Dunlop DVP3, I sold my EBVP JR.

The problem I faced was as the EB pedals work with an inner cord, I had problems to reach the max value accurately (16383)...