Hi Guys
I just got the Kemper Remote and the EP1-KP.
I wanted to use the EP1 both as a wah wah and as a volume pedal.
I was struggling with this, but with help of another topic I worked it out. Maybe a step by step guide will be usefull for some people.
A. I like the volume pedal to give a slight boost in volume. Rhythm/Lead
B. Make sure the wah is in Stomp A
C. For this example I used the 3 and 4 inputs of the Remote.
1. connect output 1 (EP1) with input 3 (Remote) and output 2 with input 4
2. Rig Page 3: Post effects (or another setting you might prefer) Range=-1 also personal taste (see A), wah to volume checked
3 System Page 7: Mode Pedal Type 1, Function Wah Wah. Don't forget to calibrate.
4 System Page 8: Mode Mono Switch, Switch Tip Stomp A on/off
5 System Page 11 WahPedal >Volume=checked
6 Choose a wah (in stomp A), Pedal Mode Bypass toe.
This worked for me. Hope it's clear
A small remark: when you switch to a different rig, the volume will be at max, even though the pedal is in the up position. You will have to move the pedal up and down to set the volume to its lowest setting. The Kemper Helpdesk (Great!!) tells me there is no way around this. it is impossible to programm it differently.
Greets
Steven