kemper -> spdif -> firestudio project -> logic pro X no signal

    i'm trying to setup a direct recording like in the kemper tutorial monster setup with 6 guitar outputs.


    i have 2 firestudio projects - 1 has 8 channels for drums.


    the 2nd has 1 direct bass track and the 6 guitar tracks coming from the kemper - all direct and out to a headphone amp.


    i bought a digital rca cable from amazon and hooked it up on the out on my kemper to the in on the 2nd firestudio project. as i understand it the FSP has 8 mic pre's and channels 9 and 10 are the spdif ins.


    so on the 2nd firestdudio the spdif in's should be 19 and 20.


    i'm not getting any signal in logic.


    the firestudio is set to normal and master - if i set it to spdif the audio gets really choppy and cuts out constantly.


    when hitting output on the kemper and adjusting the spdif output to - git / stack - do you have to hit anything to save this setting?


    thx

    >the firestudio is set to normal and master


    Hi there,
    If I read you correctly, you are not setting the KPA to master. It has to be and cannot run as a slave.


    Can you get one of the Firestudio Projects to work as a slave (and get sound) without daisy chaining the other?