Rig Navigation Cross (1)
Use this to navigate through the Rigs. Left and Right buttons will switch sequentially, while the up and down buttons will change in larger steps. A newly-selected Rig is instantly recalled.
Rig Navigation Cross
[Blocked Image: http://s22.postimg.org/ls3w0ib71/rig1.jpg]
1) In Rig Preview mode (the default mode where you can see Rig Name)
LEFT Rig Button goes to previous Rig
RIGHT Rig Button goes to next Rig
UP Rig Button moves you to first Rig in the next alphabet letter
DOWN Rig Button moves you to last Rig in the previous alphabet letter
2) In Browse Rigs mode
LEFT Rig Button goes 4 Rigs back
RIGHT Rig Button goes 4 Rigs further
UP Rig Button goes 1 Rigs back
DOWN Rig Button goes 1 Rigs further
Not quite sure if it was in the preview or browse mode, but when I pressed the up and down rig buttons I could select an amp and get all the rigs with that amp. However, some profile makers choose to call the amps for example Brit 800, and then they won't be there with the amps actually called Marshall JCM800.
Not quite sure if it was in the preview or browse mode, but when I pressed the up and down rig buttons I could select an amp and get all the rigs with that amp. However, some profile makers choose to call the amps for example Brit 800, and then they won't be there with the amps actually called Marshall JCM800.
Well, being able to search for "800" would be ok in this case. I need to get a few more flying hours with this unit, but so far so good. Reamping with spdif was a bit of an adventure, but it worked.
Thanks! Related to this, is there an easy way to seach for certain rigs ala the rig manager, but in the Kemper itself? So finding quickly all rigs with JCM 800 in the name, etc?
The Rig Navigation Cross buttons only allow you to go through "Rig Name" tag while Rig Manager allows you to search through all tags available. UP DOWN buttons allow you to jump between rigs based on their first letter in full name.
[Blocked Image: http://s7.postimg.org/escj3epx7/rig2.jpg]
The Rig Navigation Cross buttons only allow you to go through "Rig Name" tag while Rig Manager allows you to search through all tags available. UP DOWN buttons allow you to jump between rigs based on their first letter in full name.
[Blocked Image: http://s7.postimg.org/escj3epx7/rig2.jpg]
Yeah, I saw that. Maybe I missed it, but can I select a rig in rig manager (one which is actually on my Kemper) and have that one load up the rig in the Kemper, so I can use rig manager to search and select the rigs I want to try? I am basically looking for a quick way to try out which JCM 800, Soldano, etc works best for the reamp I am doing in a specific song, without having to scroll through many pages of rigs.
Yeah, I saw that. Maybe I missed it, but can I select a rig in rig manager (one which is actually on my Kemper) and have that one load up the rig in the Kemper, so I can use rig manager to search and select the rigs I want to try? I am basically looking for a quick way to try out which JCM 800, Soldano, etc works best for the reamp I am doing in a specific song, without having to scroll through many pages of rigs.
The profiles stored on your Kemper are accessible when you click on the MyProfiler folder on the left. Then you can enter "JCM 800" in search field to get desired result.
[Blocked Image: http://s3.postimg.org/rlhwfu8tv/mypro.jpg]
Display MoreRig Navigation Cross
[Blocked Image: http://s22.postimg.org/ls3w0ib71/rig1.jpg]
1) In Rig Preview mode (the default mode where you can see Rig Name)
LEFT Rig Button goes to previous Rig
RIGHT Rig Button goes to next Rig
UP Rig Button moves you to first Rig in the next alphabet letter
DOWN Rig Button moves you to last Rig in the previous alphabet letter
2) In Browse Rigs mode
LEFT Rig Button goes 4 Rigs back
RIGHT Rig Button goes 4 Rigs further
UP Rig Button goes 1 Rigs back
DOWN Rig Button goes 1 Rigs further
........thank you for this, roger
