I am going to purchase the remote regardless, but I would like to add an additional two-button footswitch, (maybe even two) to the remote.
What kind of switch would I need, any recommendations?
What I'd like to do.
I'd like to have a single button for each slot (by slot I mean the 8 places you can place an effect not the five patches per bank), so that I could have independent control of each no matter what. Therefore I could turn on and off my delay, reverb, mod, x slot, a, b, c, and d, each having their own dedicated switch so that I don't have to remember which does what for each Rig. If I understand correctly, a 2-button switch could be connected to one jack with a TRS cable. Therefore I could get two of these 2-button switches which would use up two jacks, (still leaving me the ability to hook up a volume pedal, even though I don't plan to do so). These extra four switches plus the four effect on the Remote would then give me a total of 8, allowing me to toggle all 8 slots on and off independently. I would assign the four effect switches on the remote to four slots and the external switch that I'm asking about to the other four slots. I wouldn't need to have any of my switches on the remote or the external ones have different assignments on different slots. The only thing that would be important is that I wouldn't have any issues with the saved on/off status of the slots. That is the external ones would behave just like the remote's effect switches, even though they wouldn't have an led. Would I be able to do this?