Problem with Expression pedal and remote (solved)

    Hi all hope you can help


    I'm using a two moog EP3 expression pedals and a dunlop dvp3, plugged into the remote as pedal 3, 5 & 6. The pedals in 3 & 5 work as expedted, the one plugged into 6 has its functions reversed(with all the same settings as the other pedals i.e. pedal type 1) no matter what I try I can't solve it... tried pedal type 2, tried changing the switch on the bottom of the EP3, still reversed.... also reversed if I plug the DVp3 into that slot ! It's driving me nuts... am I doing something wrong?


    thanks
    Mike

    Sounds like you have tried most things that I would suggest. Are you leaving the same cable plugged into 6 and swapping the two pedals, if so switch the cable out. If you have also tried the calibrating it after switching pedal type then I would open a support ticket. My Dvp3's never had an issue. When you had the dvp3 plugged in did you change pedal type back to 1? Good luck.

    Solved by taking the ep3 out of pedal 6 and putting my duel switch in there instead. expression pedals now in 3,4 & 5 and all working fine... don't know why but I'm up and running.