AUX In Morphable?

I know it's not, I tried it.

But I need to morph my synth sounds in and out, and I am unable to do this easily.

Any ideas?

I like to have my guitar volume go down via expression pedal at heel like normal, then have aux in at 100%.

Then reverse, guitar up to 100% with expression pedal in toe position, and Aux In volume at 0.

I have tried using the stereo loop but it gets colored by the stack output.

I seemingly can't morph the actual stack in and out, either, only EQ controls.

I used to be able to do all of this with my Roland GR-55, now I am switching to the Fishman Triple Play and using a Yamaha Motif Rack XS and my life is a nightmare trying to scheme up a simple way to toggle between synth and guitar with no hands!

Thanks, Paults.

Yes, I have tried (and use occasionally) the zero volume approach on both units.
I am trying to avoid PC changes, because the Motif needs MSB & LSB CC's along with the PC and it is not lightning fast.

I am just so used to using the expression pedal to rock back and forth between sounds, and I guess I will have to just get used to the new way.
The sound and overall experience of the FTP with the Motif are just too good to go back to the GR-55.

I looked at both of those, and the problem is no mix availability between the 2 sound sources if needed.

The bigger problem is all the cables on the stage, I am trying to go more minimalist, and this kind of defeats the purpose.

I have a fellow forum member over at the vguitar forum trying to crack this code as well, I appreciate all the help!

Something so simple is yet again so complex in the world of MIDI guitar!

I will do that Ingolf, but I have a gig on Sunday and was hoping for a quick solution.

Quote from ReneLangenhan

Another idea: leave the wiring as it is and do not use Aux in but a stereo loop in the Mod Fx Slot and control the mix via Morphing.
The only downside is that the Motif will go through the KPA's Reverb and Delay Fx - which might even be considered as a very useful feature IMHO

I tried that a long time ago, but you also go through the stack that way, and I need it to bypass the amp coloration.

Quote from Lati

Stereo loop in parallel path?

I thought about this, I will try it and see what happens!

Quote from reneguitar

Hi maybe you can try this. I can't try it, because I'm on holiday now .

As you can see, you must try it with THE GR-55.

Connections:
-13-pin cable from you guitar to GR-55
-synth out from GR-55 to aux in Kemper
-guitar out from GR-55 to guitar in Kemper

Go into your Pedal/GK control menu then cursor over to EXPON and turn the dial until you get to CROSS FADER. and set the pedal position for the desired voice.EX.

PCM TONE1 POLARITY TOE
PCM TONE2 POLARITY OFF
MODELING TONE POLARITY OFF
NORMAL PU POLARITY HEEL

For each tone you have 3 options TOE, HEEL AND OFF.

Display More

Thank you, but I am done with the GR-55.
The control of the onboard synths was amazingly awesome, though, and I used it as you described for 4 years.
I am trying to recreate that ability with the Fishman Triple Play and the Yamaha Motif, hence this thread.
The upgrade in sound is just too good.

No, but I am using a workaround where I am doing patch changes through the FC-1 when I need to switch quickly with no hands between synth and guitar.
I use the onboard toggle on the FTP if I can, but it is hard to do it by hand quickly live.