Help! Another Expression Pedal setup newbie question. (Solved)

  • Hello folks,


    Just got a Mission EP-1 (no toe switch) and been trying to connect it to the remote by searching through the forum for the last few hours. I can't get it to respond (I want to use it as master volume pedal for now), but it's the first time I use an expression pedal so chances are I'm just clueless.


    Main newbie question: do I need a special cable or a standard 1/4" pedal jack would work? (this might just be what I'm doing wrong)


    Thanks,
    G

  • Yes, as @hjscheffler mentioned, you'll need a TRS cable. And no need to buy an expensive one. TRS cables don't send your guitar signal/tone through them, so don't waste your money buying anything expensive. They only send signals through them.

    • Plug the TRS cable in
    • Hit "System" on your KPA
    • Scroll to the pedal section - scroll to whichever pedal input you're using
    • Set the type of pedal you want it to function as "wah, volume, pitch, etc"
    • Calibrate the pedal by hitting the soft button above "calibrate" and just rock the pedal fully back and forth a couple times.

    That's it.