Kemper Wah Settings

  • If none of the presets have the exact sound you need, you can modify the Manual and Resonance parameters of the one that is the closest to your desired sound.


    MPescuma as others have already mentioned, the first step is to make sure you have downloaded the Wah presets from the link earlier in this thread. This includes settings for nearly every major wah ever made. If it isn't in the list and you have the original, or know someone who does you can make a sound file of it and send it to Don who will try to recreate the sound and add it to the preset list.


    Thanks ! I did not download the patches yet, will give it a try today. Thank you for the tips on tweeking the settings as well.

  • Not sure this is the right topic for this, so feel free to delete if so!


    My expression pedal (DVP1XL) has a minor issue despite tightening the hardware I think is the cause:


    When in heel position, it slightly raises up so I can never use the @heel option to disable the wah.

    Is there a way to calibrate what the Kemper believes is heel?


    If not can I tape something under there and then recalibrate the Kemper to offset the issue?


  • When you perform the calibration, just don't move the pedal all the way to the heel but keep it a little ahead. Leave a little buffer basically. Do the same with the toe in case it rises up slightly when you take your foot off.

  • When you perform the calibration, just don't move the pedal all the way to the heel but keep it a little ahead. Leave a little buffer basically. Do the same with the toe in case it rises up slightly when you take your foot off.

    Thank you! Luckily I didn’t need a workaround. Against my normal rules I overtighted the hex screws and the pedal works like new. Good to know this procedure for future reference!