HELP! Left Channel ONLY!

  • So today when i was scrolling through profiles on my amp i suddenly lost my right channel. Zero output.
    I have checked every cable in my studio. Everything is fine and my DAW outputs properly in both channels.
    In a last bit of trouble shooting i plugged in my kemper headphone jack. They too have LEFT channel only. OUCH!!


    I have the most current version of the OS. I even tried writing over it but when i plug in the USB stick with a freshly downloaded version (of the version i already have) nothing happens. I guess it sees i have the most current version.
    I have looked at all the menus to see about Left and Right output assignments but found nothing.


    Can anyone HELP me!?!?!??


    Has this happened to anyone else before?


    I am hoping there is a simple step somewhere that i can toggle to remedy this issue.


    I really dont want to have to send this thing into repair.


    Help, Thoughts, Comments?


    Thanks,
    Dennis in Memphis

  • Welp, i started looking at unrelated issues on the forum. Saw one about crashing kemper.


    A post by HSJCheppier said "Start your Profiler into Browse mode while holding down the RIG button until you se "Initialising current rig" ."


    Tried it and BAM, both channels are back. Very odd.

  • Welp, i started looking at unrelated issues on the forum. Saw one about crashing kemper.


    A post by HSJCheppier said "Start your Profiler into Browse mode while holding down the RIG button until you se "Initialising current rig" ."


    Tried it and BAM, both channels are back. Very odd.


    Cool to see that it's not hardware issue!
    Please, can you write [SOLVED] in your topic name? It can help if someone have same issue.