I agree. This has happened to me als well.
If you experience this, try to patk your pedal at the heel or toe position, where it is less sensitive.
I have a nearly similar problem with my moog ep3 when using it with the whammy effect. When the whammy effect is activated and i did not touch the pedal, sometimes a small an short glitch arrives when playing. It sounds like you touched the pedal for some miliseconds. Tried it also with my mission pedal. Same issue.
If you experience this, try to patk your pedal at the heel or toe position, where it is less sensitive.
Yes, intuitively I did this when it happened, and it worked.
Still, this is the FR subforum, so... 
I also noticed that at heel or toe position this occurs less often... but while going crazy it's easy to forget how to park the expression pedal in a safe position
It would be nice to have an additional sensitivity parameter when using the wah in "bypass @ stop" mode.
When using the Kemper live on stage I experienced several times that that the effect accidentally was activated just by the vibrations that caused the expression pedal (I use a Mission Engineering SP-1) to send MIDI CC +/-1 all the time.
An accidental activation could be prevented with an option to reduce the sensitivity for the activation of the effect.
I'd appreciate this.
At the Moment I use a rubber-pad under the pedalboard where my remote rests.
