Panel Mount for KPA Rack setup (Information Inside)

  • I have been gigging for decades and about 10 years ago, I decided that I HAD to simplify both my PA rig and my guitar rig. The PA moved from big folded horns, 15" 3-way tops, and an entire rack of heavy amps to a digital mixer and some powered speakers. That was first, because that technology moved first.


    I tried out many digital amps and found that nothing at that time could hold a candle to my beloved VHT rig .... so I was stuck carrying some horridly heavy cabs, amp, and pedal board to all gigs.


    Then came the KPA (thank God).


    I promptly purchased the rack version as soon as it was available, put it into a rack, added a power conditioner, and away I went .... except it was still a PITA to plug in the KPA to the PA on dark stages without digging around through the back of the rack.


    I have recently updated my KPA to include the Kemper Remote. This lowered my cable count down from the 3 connections (power, and 2 MIDI) needed to connect my FCB1010 to only 1 for the Kemper Remote and also lowered the stage footprint.


    Just to tie a bow on the whole package, I setup a panel mount so that now EVERYTHING plugs flush into the panel mount and the entire rig is protected in a nice rack. I really wanted a solid stage setup with Ethercon connectors on both sides of the Kemper Remote cable.


    So for those in the same boat, here was the parts list:


    TP-LINK Gigabit PoE Injector Adapter (TL-PoE150S) (Need this to be secured in rack)


    Neutrik NA3FDM XLR "D" Series 3-Pin Female to Male Adapter (2 of these with 2 3ft XLR patch cables)


    Penn-Elcom R1273/2UK Rack Panel For EP/XLR

    Item

    Qty
    Price
    Total



    [Blocked Image: https://www.parts-express.com/data/default/images/catalog/120/092-180_HR_0.jpg]
    Neutrik NE8MC Ethercon RJ45 Cable Housing Nickel



    Part # 092-180






    1
    $2.74
    $2.74


    [Blocked Image: https://www.parts-express.com/data/default/images/catalog/120/092-1815_HR_0.jpg]
    Neutrik NE8FDP-SE etherCON RJ45 Feed Through Connector with Sealing Kit



    Part # 092-1815






    1
    $11.92
    $11.92


    [Blocked Image: https://www.parts-express.com/data/default/images/catalog/120/150-371_HR_0.jpg]
    Cat 6 Computer Network Patch Cable 550 MHz 3 ft. Black



    Part # 150-371






    1
    $2.70
    $2.70


    [Blocked Image: https://www.parts-express.com/data/default/images/catalog/120/093-127_HR_0.jpg]
    Switchcraft EHUSBBABX USB B to A EH Panel Mount Connector with 4-40 screws



    Part # 093-127






    1
    $6.39
    $6.39


    [Blocked Image: https://www.parts-express.com/data/default/images/catalog/120/130-040_HR_0.jpg]
    USB 2.0 Cable A to B Black 1m (3.3 ft.)



    Part # 130-040






    1
    $1.98
    $1.98

  • I'll get some pics soon. Let me get things cleaned up though ;)


    I use the USB cable to connect to Rig Manager. I also have 2 MIDI connections on the panel that I was using for the FCB1010.