Hi,
When I connect my Kemper to the Mixer the left output is not as loud as the right one. Any Idea how to fix this?
I haven't got the possibility to test it with spdif. It happens also with xlr connectors.
Thanks,
Stefan
Hi,
When I connect my Kemper to the Mixer the left output is not as loud as the right one. Any Idea how to fix this?
I haven't got the possibility to test it with spdif. It happens also with xlr connectors.
Thanks,
Stefan
Here's a few ideas for you:
1. Check the cables from your KPA to your power amp or speaker cab.
2. Try disabling each module one at a time, to ensure that one of your modules is not causing the problem. Especially the loop module.
3. If you use anything in the loop, try unplugging it temporarily, to test.
4. Go into the Master Out section and check your output settings. Make sure that your are using the correct stereo out setting.
5. If using a stereo effect in the loop, make sure you are using the stereo loop module in the slot, and not the mono loop module.
Try exchanging the two mixer input channel connections - perhaps one mixer channel is not as sensitive as the other one, or the input trims on the mixer are not set exactly to the same level.
Exchange all components of the channels - cable, mixer in/output , amp-output (if you do not use active Speaker) and also the Speaker. (In single steps)
If you have at least same result then the kemper could have the problem.
Hi,
When I connect my Kemper to the Mixer the left output is not as loud as the right one. Any Idea how to fix this?
I haven't got the possibility to test it with spdif. It happens also with xlr connectors.
Thanks,
Stefan
Have you solved this situation @touchguitar3798?
Have you solved this situation @touchguitar3798?
Again: What's the point in resurrecting all those old threads without any reason?
You seem to do this all the time recently and it's annoying. I'd appreciate if you'd stop it.
Again: What's the point in resurrecting all those old threads without any reason?You seem to do this all the time recently and it's annoying. I'd appreciate if you'd stop it.
I've already replied to you in another thread.
Just don't understand why that hurts you.