(Sorry if this is known and already has a thread, I couldn't find anything)
I've recently been getting some really weird, er, distortion, with my distortion stomps that pretty much renders them useless. It's crackly, digital sounding, almost like the Bit Shaper stomp is blended in... here, just listen to an example:
https://dl.dropboxusercontent.…en%20Scream%20problem.wav
The same riff, reamped four times with the boosts listed below, using a slightly tweaked HEARSE UBER 11 from the Rig Exchange. I get the same issue with most profiles, though.
1. Just the Kemper with no boost.
2. Green Scream with Drive 0, Tone 7.5, Level, 1.2. The problem exists no matter what settings I use, this was just the "best" tone I can get.
3. Ignite Amps TSB-1 in my DAW with Drive 0, Tone and Level around 6. I can crank all of them up and it still sounds like a normal guitar tone with the overdrive cranked.
4. TSE 808 in my DAW, same settings as above.
For further reference, here's the DI reamped through my Kemper with everything off, and then the Green Scream by itself:
https://dl.dropboxusercontent.…0Scream%20problem%202.wav
I get similar artifacts with the other distortion stomps too, but none of them are this pronounced. Just for fun, here's Mouse straight into the cabinet from that profile - that's right, there's NO amp in this example. Seriously:
https://dl.dropboxusercontent.…0Scream%20problem%203.wav
..and that's with Drive still at 0.
- I'm running the beta for 5.0 at the moment, but I was having the same problem with the most recent v4 beta as well.
- I tried doing a factory reset (hold System when booting up) yesterday, but it didn't help.
Fucked up, right?