Before i start a request, - is there a way to accelerate the Rotary speed from slow to fast by a pedal (with the speed parameter) or not?
If not, it would be a "nice to have"
I'm used to the "neo instruments ventilator" and the acceleration is a killer feature.
If you switch the rotary speed of the KPA from slow to fast, you get that effect and it sounds great. Would be nice to control that parameter with a pedal.
Rotary speed control
-
-
Nice suggestion. I would like the same function for controlling the amp gain by pedal (already implemented?)
-
Also the possibility to have different intermediate value of speed control between the only two available now low and high, could be very useful.
-
+1
-
Even just 6 or 8 steps of settings would be cool.
-
You can switch it by a foot switch.
Assign it to the Rotary Speed. -
Also the possibility to have different intermediate value of speed control between the only two available now low and high, could be very useful.
+1, I want to be able to set the exact speed of rotation. -
for controlling the amp gain by pedal :
adjust the max gain on your amp
select wah pedal booster, set the range to -100
adjust clean sense to compensate the vol. as you lower the gain with the pedalhave fun switching from clean to rythnm & lead by the touch of your foot & wha
-
A short notice about the rotary, you can achieve a simple but beautiful 'rotovibe' with a speed control.
Just activate : Ring Modulator then adjust settings to Pedal off / MIX 47% / Manual 5.1 for a slow roto or 5.3 for a speed one, 5.2 is great too.
I asked for a better 'resolution' in feature request (like 5.05) but it doesn't look do-able ?
I will try to post a little sample tonite (2 speeds )
-
bump
-
Anyone here know how to use i pedal of FCB1010 to control fast/slow speed of rotary with 1 pedal?
-
Anyone here know how to use i pedal of FCB1010 to control fast/slow speed of rotary with 1 pedal?
Make the pedal send midi CC #33, which is Rotary Speaker (slow/fast).
Note that you will only get 2 speeds, so it's maybe better to make a switch do this. -
....it could be usefull the possibility of speeds manipulating by a pedal...
-
Make the pedal send midi CC #33, which is Rotary Speaker (slow/fast).
Note that you will only get 2 speeds, so it's maybe better to make a switch do this.Thanks Doc, I actually meant to say switch ( and English is my only language dah!) will cc33 just change the speed(slow/fast) or can it also turn off the Rotary on/off effect from the same pedal?
-
That will change just the speed. To switch it on/off you need a separate CC
-
For switching off the rotary you need to send the CC of the slot the rotary is assigned to.
#17 Stomp A
#18 Stomp B
#19 Stomp C
#20 Stomp D
#23 Stomp X -
thanks, I pretty much new the answer, I guess I just needed wise reinforcement
-
I also please request a variable rotary speed control. That would be great!
-
+1 for variable speed controle!
-
+1 for control...I don't use footswitches and don't have a need to carry extra gear. I'd like to set it manually or be able to use the tap tempo depending on song speed.