Mick i cant believe you did that and helped Magnus, Ill buy any packs i dont have as a thank you for that, hopefully i dont have all of them
THANKS MICK!! SAVE MAGNUS and get good tone!! Please Help Save Magnus guys he does great reviews for us all
Ash
Was definitely awesome of Mick to do that.
Mick i cant believe you did that and helped Magnus, Ill buy any packs i dont have as a thank you for that, hopefully i dont have all of them
THANKS MICK!! SAVE MAGNUS and get good tone!! Please Help Save Magnus guys he does great reviews for us all
Ash
Magnus did a killer demo of my 6100 pack so I wanted to help him out. No need to buy any packs or anything Ash.
Must be the time zone Mick sorry did not read this in time 
picked up the EVH, cant believe i did not have it!!
Thanks again man for all the free stuff you do here and support
Sincerely
Ash
Thanks for the support, guys! Very much appriciated! As was the offer from Michael, just fantastic... thanks again!
Just subscribed... 8 more to go Magnus 
Thanks guys!
Mesa Boogie MK3 Blue Stripe pack now on sale.
10 cabs plus direct profiles. All info on Big Cartel page.
Download free sample profiles on the page too.
Use code MK3RULEZ for 20% off any packs until next Friday
http://tmsprofiles.bigcartel.com/product/tms_mk3
So here is a non heavy example of the mkIII
TMS MK3 M30V30 DRV2G
My tweak: Bass +0,3, Middle -2,3
No EQ
Delay in the mix = Main Station; Default
Cool amp for slow neck solo sounds and agressive enough to play heavy stuff. Very versatile profiles.
Edit: Played with my strat.
Thank you Mick
Cheers
Frank
TMS MK3 M30V30 DRV2G
Frank that's not fair.
I struggle every day to stop buying profiles.
I've suxeed more and more of that lately.
But with an appetizer like that, it's impossible not to get weak.
Great playing Frank
Display MoreFrank that's not fair.
I struggle every day to stop buying profiles.
I've suxeed more and more of that lately.
But with an appetizer like that, it's impossible not to get weak.
Great playing Frank
Thx Harry, It's all a question of body mastery. Go into you............oooohhhhmmmmmmm. I need no new profiles........I need no...... I need no...........
Thx Harry, It's all a question of body mastery. Go into you............oooohhhhmmmmmmm. I need no new profiles........I need no...... I need no..
Oh Frank, I think you've heard that before, the spirit is willing but the body is weak.
I always run out of breath before I have reached the necessary number of repetitions 
Best cure for profile addiction is just to give in ..100% cure rate
Ash
Working on sounds for a Vox NT50 pack.
This all valve head has beautiful Vox clean sounds and a surprising amount of gain on the drive channel.
The drive sounds are great for stoner rock like QOTSA etc.
I decided to try a Neumann condenser for these and think it really worked.
Aurora Audio GTQ2 mic pre used to add some warmth and fatness.
2 clean, 1 crunch and 3 drive sounds in this.
Clean and crunch sounds set up with USA Dlx Tele with noiseless single coils and drives set up with Gibson LP Standard with burstbuckers
Opinions re these really appreciated before I go ahead and make the full pack through a load of cabs.
Preview of the 4 new cabs I'm updating all packs with.
4 free profiles with 6505 to try.
Bogner 4x12 V30
Bogner 4x12 Greenback
Marshall 1960B H Creamback
Marshall 1960A G12T75
https://my.pcloud.com/publink/…wJEFIgNm60FoQdXHze78pckAV
I decided to spend the day capturing the ultimate Peavey 6505 to Mesa Rectifier cab profile.
The 6505 is my most used metal amp in the studio so I wanted to create a profile that would sound perfect in a final mix.
The chain is TS808 Tube Screamer to 6505 to Rectifier cab.
Mics are sm57 and vintage MD421, placed by sending pink noise to the amp and getting the mics completely in phase.
Mics then go to 2 channels of Aurora Audio GTQ mic pres.
Once I got the mix of the 2 mics I wanted, I added a Sonnox EQ to make 2 small cuts at 260Hz and 2.5KHz before the summed signal was returned to the kemper.
Once I had captured the studio profile, I made a direct profile using BSS AR133 DI box to Focusrite ISA828.
So this profile is a proper merged profile meaning you can have a direct amp signal to a cab on stage and the full rig to front of house with no compromise.
I have gate on slot A and high and low pass EQ on slot X.
Refined with PRS Custom 24 with Duncan SH11 from Apogee Ensemble Thunderbolt to Radial JCR Reamp box with pre recorded DI track that works great for refining.
Please comment on how this profile works for you.
(and if you want to really say thanks, buy a pack on my web store)
Once I had captured the studio profile, I made a direct profile using BSS AR133 DI box to Focusrite ISA828.
So this profile is a proper merged profile meaning you can have a clean DI to a cab on stage and the full rig to front of house with no compromise.
Hello Mick,
Thank you for sharing and I look forward to checking out this profile. Just a minor note...I know what you meant, but your terminology (highlighted in bold, in quote) may be a bit misleading/confusing. I think you meant that this Merged profile will allow you to send a Direct Amp (no cab, no mic) to a traditional cab on stage. A "Clean DI" signal typically has the meaning of just a raw, dry direct inject / balanced instrument signal, to send to a mixer (or use for re-amping purposes)
