Problem using stereo loop

amclw1 · Sep 1st 2017

Hi,
Help! I am having trouble setting up a stereo effect.

I have connected it thus:

Kemper Direct Out/Send to pedal input.

Pedal Left output to Kemper Return.
Pedal Right output to Kemper Alt Input.

Selected Stereo loop in X slot.

I am getting output with X slot OFF, no output at all with X slot ON.

Nothing is showing up at the pedal.

I'd be grateful for any assistance.

Thanks.

Kempermaniac · Sep 1st 2017

What did you dial in on the KPA-side as output signal for the direct out? And did you bring up the output level of the direct out?

amclw1 · Sep 1st 2017

"Direct out used for loop stomp" (page 1 of 7) and volume is greyed out...

Kempermaniac · Sep 1st 2017

Try bringing the volume for direct out up (regardless if its greyed out) and see/hear what happens.

amclw1 · Sep 1st 2017

No change. Selecting the X slot acts as a global mute!

amclw1 · Sep 1st 2017

Sorted - this clown had the effect pedal input/outputs the wrong way round! Mea culpa, sorry for time wasting.

Robrecht · Sep 1st 2017

I'm sure you're not the first one to do that. There's a logic in connecting like to like: red to red, blue to blue, input to input, output to output.

Share