How to know MIDI code of a rig ?

  • Hello,


    I have the Kemper and its remote.
    I would to control a Windows program or an external hardware multi-effect with the kemper (to manage voice effects).


    How to know MIDI code of each rig (i play in perform mode) ?


    I want that each rig of my Kemper correspond to a voice effect rig.
    Should i plug the MIDI out or the MIDI through to send the MIDI message ?

  • From the manual:


    Transmitting MIDI Commands in Performance Mode
    MIDI commands can be triggered and transmitted to up to two external devices, whenever a Slot is loaded inPerformance Mode. Select “MIDI Settings” on page “Slot Settings” and select the MIDI program change numbersassociated with Slots of current Performance. In System Settings, navigate to page “Perform Mode: MIDI”, and usesoft knobs 1 and 2 to assign a MIDI channel to each of the external devices. Use soft buttons 1 and 2 to determinewhether the corresponding external devices are connected to MIDI OUT or MIDI THRU.
    As soon as you select MIDI THRU to transmit MIDI commands by Slot the Profiler will stop forwarding incoming MIDIdata to MIDI THRU.
    For your convenience, you could also assign logical names to those two external devices.


    HTH