For updating my KPA and/or uploading new rigs I purchased or got for free can I use "any" USB stick?
And if, is it just like plug and play, says, I d´load on the stick, plug it into my KPA and the rest is automatic??? 
Can I use any USB keyboard for overwriting the Rig names etc???
You need to format the USB stick you intend to use in your profiler first.
A menu turns up when you plug in.
Yes to your 2nd question.
I'm not sure what the second question really meant. You can't just hook up a USB keyboard to the Kemper, but you can use Rig Manager on your computer ...
I'm not sure what the second question really meant. You can't just hook up a USB keyboard to the Kemper, but you can use Rig Manager on your computer ...
Hey, Zap:
Unless things have changed, you CAN connect a USB Keyboard directly to the KPA. But, I agree with you that using Rig Manager makes Rig tag editing easier 
Hey, Zap:
Unless things have changed, you CAN connect a USB Keyboard directly to the KPA. But, I agree with you that using Rig Manager makes Rig tag editing easier
Ha! What can you do with that keyboard once hooked up?
Ha! What can you do with that keyboard once hooked up?
Well... writing?
Changing rig names, amp names etc without using the knobs and without using the Rig manager,
wich would prolly be the easiest way
but if you don't have your 'puter in your rehearsal room or you want to make changes on thy fly, for instance
You can update text entry/name fields in Edit mode with a USB keyboard.
Note: it is still necessary to Store the changes, or they will be lost.
Geez, I've only had the thing for 5 1/2 years, give me time to learn it! 
Geez, I've only had the thing for 5 1/2 years, give me time to learn it!
ROFL 
Every day is a school day! 
You can update text entry/name fields in Edit mode with a USB keyboard.
Note: it is still necessary to Store the changes, or they will be lost.
I've tried plugging in a USB mini-keyboard on my unpowered rack KPA running the 5.3.[mumble] firmware and not had any luck using it to enter text (or do anything else, really). Is there any special configuration that needs to be done (I wouldn't think so...), or is the Kemper picky about what keyboards it'll talk to?
I used a standard computer keyboard, with a USB 2.0 type A connector. No configuration needed, but, text fields could only be updated when the screen for the field was active on the KPA.
It's been years since I've done this. I use Rig Manager, instead.
Thanks, guys, so far!
I grabed a lying-about-USB-stick today and updated my Toaster!
I also d´loaded the Rig Manager and made the first steps... wow, it´s over 11k rigs available! 
@tabaer: ASA my USB Keyboard has arrived I´ll tell you how it works but I think @paults is right when he says you can only change the "active" field, where the curser blinks...
