Remote setup/programming

    Hi Ray, the manual is a really good explanation of this, however, the foot controller is so simple, you won’t believe it… All you do is press a button while at the same time pressing the button on the amplifier.
    So, if you have a delay set up in a rig, at the same time press that green delay soft button on the amplifier while pressing which ever one you want to use on the foot switch, (choose from 4 upper row right side) if you save the rig with the delay on, it will automatically come up when you choose that rig, and you will be able to turn it on or off with the foot switch button you have chosen, if you choose to have it off, then you can call the delay up in that rig with same button.
    The five switches at the bottom of your controller are for performance mode when you save rigs in the five different slots…
    The two up/down on the left of remote take you to different performances you have stored.
    This is a quick video just to get you started but please ask any questions, it is the most well thought out foot controller I have ever used And once you start playing with it, you will see how easy it is to set up…
    Keith
    https://m.youtube.com/watch?v=2G6BfBBm6s8

    Quote from donpotterguitar

    my remote does not boot to the 1-5 rig settings. only channel 1 works. cannot reach any support

    are you in Browser or Performance mode?


    Up/Down Buttons (1)

    In Performance Mode, use these buttons to navigate through your Performances. A short tap will step up or down to the next Performance. Holding will initiate scrolling. Depending on the status of the parameter "Performance Load” in the System Settings, the PROFILER will either load Slot 1 or the current Slot of the selected Performance immediately, or wait (“Pending”) until you hit one of the five Rig Buttons.

    In Browser Mode, you can step or scroll through Rigs in your browse pool according to the selected View and Sort Order criteria. The option “Group of 5/Single Rig” on page Remote Settings in System Settings determines, if the Up/Down Buttons step through the Rigs individually or by groups of five in Browser Mode.

    The function of the Up/Down Buttons can be changed on the “Remote Buttons” page in System Settings, reached via “Button Assignment” on the Remote Settings page.

    Users of the PROFILER Stage can find identical settings on the User Interface 2 page in System Settings.