********Note you can ONLY do this with 2 8ohm speakers ! ********
Here is a wiring diagram for your reference.
********Note you can ONLY do this with 2 8ohm speakers ! ********
So as most of you I'm sure know, the guitar cabinet makes a huge difference in your sound, it is no different with a powered Kemper. So I thought I would throw out this little tip, this is how you can run two guitar cabinets, using one or the other(L,R) or both in series (at the same time.)
I wired up a little panel with 3 mono jacks that is easily accessible, see wiring schematic above, I have a closed back cabinet with a vintage 30 speaker (I also sometimes swap the v30 for an EVM12L which sounds great) running alongside a fender deluxe reverb style pine cabinet with a weber 12f150 speaker. Now with the protection that Kemper has set up on their unit it's very easy to just unplug from one cabinet to the other, you do not have to turn the output on and off every time. I can get amazing fender black face sounds from one cabinet and amazing distortion sounds from the other just by moving my speaker output from one jack to the other. You can also run both at the same time.
If you run one or the other, it will be 8ohms of resistance to the Kemper, if you run both, it will be 16ohms of resistance to the Kemper both of which are safe.
Quiz What type of speakers can you use for this wiring config????
********Answer - You can ONLY use 2 8ohm speakers ! ********
Cheers
Jason