Hi folks, this might be a bit left field but bear with me.
I have a Mission SP-1 RJM which I am using with my remote. As far as I can make out from the specs the SP1 RJM is exactly the same as the EP1 KP except that the RJM has a TRS out for send 2 while the KP has a TS. None of this matters if you only want to use it as an expression pedal. However, if you want to use the switch to turn effects on and off etc it does. Neither a Standard TRS or TS cable will work with the Remote as the Tip and Ring seem to short out and confuse the Remote. RJM get round this on their PBC when using Mono/Stereo effects by using what Ron calls a Ring Disconnect cable. This is a cable with the Tip and Sleeve wired as normal but the Ring only connected at one end. I've used it on RJM stuff before and it works. I thought it might also work between the SP1-RJM and the Remote but it doesn't.
Anybody else tried this?
If so how did you solve it?
I'm thinking my next try might be to disconnect the Ring at both ends and failing that connect the Ring to Sleeve at one end rather than leaving it disconnected.
Does anyone know how the Remote's switch jacks are wired? ( @burkard ? )