Noise Gate Stomp Threshold, Distortion Stomps Volume, SPDIF Volume

    Hi, I´d have some whishes:

    1. The Threshold of the Noisegate Stomps ist at 0,0 still too high for me

    2. The Volume of the Stomps is at the lowest value (-5,0) sometimes still too high for me

    3. it would be useful to have an offset for the SPDIF Output Volume (and perhaps also the volumes of the other outputs) programmable per Preset and to have the possibility to control it per MIDI Controller (I go from the SPDIF Out to a Lexicon MX 200 and would like to have this Volume controllable


    thanks Martin:)

    1.2. have you checked if output is clipping? Have you checked with more than one guitar?

    Think for yourself, or others will think for you wihout thinking of you

    Henry David Thoreau

    Quote from Martin Vogel

    1. The Threshold of the Noisegate Stomps ist at 0,0 still too high for me

    2. The Volume of the Stomps is at the lowest value (-5,0) sometimes still too high for me

    1. if the noisegate stomps (expanders) are too much for you, have you tried the more subtle front panel NOISE GATE?


    2. you can always insert a Pure Boost with negative volume after the stomp


    hth

    thanks for your replies:)


    @GearJocke

    Output is not clipping, but I want to control the SPDIF Volume by MIDI so that i can use this output like an effect send (I already do so, but unfortunately the Lexicon MX 200 has no parameter for Volume and the Mix parameters have to be 100% because I use the Lexicon as a parallel effect).

    And yes, I use the Kemper with more guitars.


    @DonPetersen: I did not test the Input Noise-Gate much but I noticed that it first closes the input and much later (at higher settings) it kills the noise of the Kemper itself in the way of a highcut filter. I would like a Gate that already opens when I turn on the Guitar Volume, driven by the little noise of the Guitar Pickups- I have an analog Gate at home that can work like this- and when closed kills the whole noise of the Kemper preamps.

    I´ll try the input noise Gate in conjunction with the 2:1 noise gate stomp, perhaps it helps.

    To use a Boost stomp with negative volume could be a way, but i have to switch the distortion with one single MIDI control change, and unfortunately the Kemper MIDI implementation ist not configurable free.


    But I like the Kemper very much, it is my live-amp for the future.


    Best regards

    Martin