Hi All, I'm a very new Kemper user, just got my KPA yesterday. Having never played through one before, I acclimated in stages, first booting the KPA and updating the firmware, playing with it for a while. I then connected the Remote & learned how to operate that, and then finally attached my Mission EP1-KP. IOnce I got that connected and a patch set up with wah and playing with it for a while, I noticed an issue where if I'm rocking the wah in time (quarter notes around 120bpm) and scratching 16th notes (that funk 'whakka whakka whakka' thing) the wah doesn't seem to be tracking 100%, the first few 'Whakkas' are either non 'wah'd or the wah effect is even reversed.
I did calibrate the pedal (I think - in System settings under that port exp slot 5, I just moved the pedal back and forth, there was no 'done, you're calibrated' or anything - perhaps I didn't complete the calibration?). When I updated the firmware of the KPA I did not have the remote connected - is it possible there might be a firmware mismatch? The FW on the KPA was 5.5.something, now is current.
Thank you in advance for your help, I'm already finding this community to be incredibly helpful!!!!