Just purchased a powered rack unit and have it running into a Marshall 2x12 cab.the kemper looks quiet complicated for a first time user so was looking for a quick set up and things i can tweak to get a good full hi gain sound.
Initial rack settings
- Bungle6972
- Thread is marked as Resolved.
-
-
The best place is the manual to be honest.
But if you are a more visual type like me, then try these vids below (you can also try the tips and tricks section in this forum).
-
-
My suggestion is to start with the basics...
Get it connected properly ( speaker lead into 2 x 12) to get some sound.
Connect PC and use Rig Manager to look for rigs on Rig exchange.
Search for the types of amps you like e.g JCM 800. If you find a sound you like, use bass, mid, treble, presence and gain like an ordinary amp. Save it and keep looking.
Play with direct profiles and studio, and switch off cab monitor.
Once you have a set of sounds then tweak further using the deeper parameters and effects.
It can be daunting but one of the great things about the KPA for me is being able to dial in a great sound very quickly. Try not to be tempted over tweak or try to make a duff base profile sound good - start with a good sound.