OS7 Public Beta Discussion

  • And another issue in RM - when you copy a performance and double click to load a slot, it loads that number slot in the previous performance.


    Have to say, I've never had quite so many issues just trying to get things to work...!

  • Or i'm running external clock as master, which the Kemper can't do ;)

    I don't understand what you mean there.


    I am using Internal source for clock sync, tested both 6i6 and 18i8 now; with, 96KHz, 128 samples, works fine.

    Kemper Powerhead w/remote
    Focusrite 18i8 (2nd Gen) - Windows 10 - Ableton Live - Yamaha HS-8's - DT770 80 ohms
    Am Pro Strat HSS - AVRI '59 Strat - '50's & '60's Tribute Les Paul - Am Pro Tele
    Favorite FREE SC profiles: Hays, George_Alayon | Favorite FREE HB profiles: Diogo, Djemass

  • Just turned on the Kemper after saving and creating two new performances last night - and it's duplicated one over the top of the other. It did it yesterday as well.


    This release seems to be full of issues - never had these issues on 6.0.0. Incredibly frustrating.


    EDIT: I left the Kemper alone for 5 minutes - came back, and the performance slot had changed back to what I'd originally saved it as....! It showed both slots originally as the same names, same profiles etc. (slots 18 & 19). Went away, came back, and slot 19 had changed to the original saved performance from last night.... very very weird.

  • Just turned on the Kemper after saving and creating two new performances last night - and it's duplicated one over the top of the other. It did it yesterday as well.


    This release seems to be full of issues - never had these issues on 6.0.0. Incredibly frustrating.


    EDIT: I left the Kemper alone for 5 minutes - came back, and the performance slot had changed back to what I'd originally saved it as....! It showed both slots originally as the same names, same profiles etc. (slots 18 & 19). Went away, came back, and slot 19 had changed to the original saved performance from last night.... very very weird.

    =O

  • Just turned on the Kemper after saving and creating two new performances last night - and it's duplicated one over the top of the other. It did it yesterday as well.


    This release seems to be full of issues - never had these issues on 6.0.0. Incredibly frustrating.


    EDIT: I left the Kemper alone for 5 minutes - came back, and the performance slot had changed back to what I'd originally saved it as....! It showed both slots originally as the same names, same profiles etc. (slots 18 & 19). Went away, came back, and slot 19 had changed to the original saved performance from last night.... very very weird.

    that isn’t good...are you saying things are changing on their own while switched on or when you turn off and back on?

  • I don't understand what you mean there.


    I am using Internal source for clock sync, tested both 6i6 and 18i8 now; with, 96KHz, 128 samples, works fine.

    The Kemper must be the source of the clock, it's a hardware limitation that will never disappear AFAIK.
    If on the 6i6 you are setting the clock sync as "internal" (NOT spdif), you will have clicks. If you don't hear them, either you are not paying attention enough or the music you are playing is covering the clicks, or your monitor system cover them, but they are there .

  • that isn’t good...are you saying things are changing on their own while switched on or when you turn off and back on?

    Yep.


    I know it sounds ridiculous - but it's the honest truth.


    Saved slots 18 and 19 last night, called 'NO ONE KNOWS' and 'AUDITION', respectively. Flicked between the two to practice, all was fine. Turned the Kemper off.


    Started the Kemper this morning, and slots 18 & 19 were both called 'NO ONE KNOWS', with the exact same rigs, sounds etc. FLicked between them several times as I couldn't believe it and - quite frankly - I was super p*ssed off.


    Went away for about 5 - 10 minutes, came back, and slot 19 was now called 'AUDITION' again....!

  • Bizarre, I know.


    Just turned it on to check, and all is OK at the minute. Wondering if there's an issue when you copy / paste performances in RM, rename things, save it and then turn off and on...? Will try and replicate.

  • This is a fixed bug. Please update to 7.1.2 to receive the fix for this.

  • Running latest OS for Windows. Updated last time, a few days ago. Was hoping it would fix the issue I had come up from the update prior. My favorites folder view isn't working. Either the Kemper thinks every rig is a favorite or none of them are. Seem to think it either made every preset a favorite, as if none were, going to that setting would show nothing. Anyone have a fix? If not, how do I go backwards with OS updates?

  • This is what I'm experiencing, and am able to use Internal sync with S/PDIF.

    Kemper Powerhead w/remote
    Focusrite 18i8 (2nd Gen) - Windows 10 - Ableton Live - Yamaha HS-8's - DT770 80 ohms
    Am Pro Strat HSS - AVRI '59 Strat - '50's & '60's Tribute Les Paul - Am Pro Tele
    Favorite FREE SC profiles: Hays, George_Alayon | Favorite FREE HB profiles: Diogo, Djemass

  • JSB the point isn’t whether or not you are able to do it just now. If you say that you have it working without any clicks and pops I have no reason to doubt you. However, the technical spec (according to CK himself) is not capable of doing this robustly due to hardware limitations. With most things in life it is possible for unlikely and unexpected event to occur by chance on occasion. However, that doesn’t mean the can be recreated at will or be expected to last. You may be experiencing a fluke period where everything is working beyond its apparent limitations but I wouldn’t take that as evidence that it will continue to do so indefinitely. I would enjoy it while it lasts but don’t be disappointed when it eventually stops either.