Hey ho to one 'n all.
Here is My "And44ClassicRig Pack"
Ok so the Amps... in No particualr Order.
Marshall 67 Plexi - Profiled 3 Mics - U87/57/121 on Rear
Marshall JCM800 84 - Profiled 3Mics - U67/57/121 on Rear
Fender 57 Twin - Profiled 3 Mics - U87/121/U67 on Rear
Fender 69 SR -Profiled 3 Mics - 57/U87/121 on Rear
Matchless DC30 - Profiled 2 Mics - U67/57
Carr Slant 6v6 - Profiled 3 Mics - U67/57/121 on Rear
MesaBoogie 86 Mark IIc - Profiled 3 Mics - 57/421/121 on Rear
Fender 1961 Bassman - Profiled 3 Mics - U67/57/121 on Rear
Vox AC Top Boost 66 - Profiled 3 Mics - U87/421/121 on Rear
WEM 70 Dominater - Profiled 2 Mics - U67/121
Bogner Ecstasy - Profiled 2 Mics - 57/421
Divided by 13 - Profiled 2 Mics - U87/121
Mesa Treadplate 92 - Profiled (Same cab as Mark2C)
TwoRock Classic Reverb - Profiled -3 Mics U87/57/121 on Rear
Blackstar Artisan 15H - Profiled 2 Mics 57/U87
Randall RM50 (This amp failed to work sorry, No idea why yet)
Riviera Knucklhead KR100 (Tubes Blown, will Profile this in a few weeks)
Blackout Twosome Fuzz
Additional Information and cabs.
All Amps were captured with highest quality Pre's using top of the range Mics. - some amps have effects some done.. was depending on the moment.. and if it really made a difference or not.
Also as a Bonus I also ran a Clean Poweramp through to most cabs (where possible) to capture just the cabinet. using multimic setups.
Included are :-
Marshall 4x12 GreenBacks
Marshall 4x12 V30
Marshall 4x12 G12
Orange 4x12 V30
Carr 2x12 Patriot Em.
Bassman 1961 4x10 Jensons
Fender Twin 2x12 Jensons
Fender 1x12 ext cab (did not write down speaker sorry)
Mesa 4x12 - V30
Mesa 4x12 -C90
Vox AC30 Blues
Bogner 4x12 V30
Also for fun.. I did 2 Marshall cabs with Just ROOM mics.. so if you re-amp you can add those for that fatter feel.
Ive gone through and done a quick play test of all.. its up to you to find the sweetspot. as My guitar/tone will differ from your own. - for me.. I mostly play Blues/Rock and use the neck pickup on my strat/tele so thats wht I dialed in my tone for. - but everything was recorded pretty much Flat so its good to tweek!.
I'mm going to wrap these up very soon for you all to download..
But its been a bust 2 weeks getting it all done!.
Now skint lol.
Here is a Clip from Audioholic to show some of the samples
Here is another clip from Audioholic using the Bogner patches
Love them or hate them, but here they are! all 122 Profiles!
Here are the Cabs you can use on anything..
NOTE: - To get 100% Clarity in the cabs, I had to run through a "flat" poweramp before hitting the cabs. - this means you will need to EQ the cabs once you chosen. - I'd recommend the Graphic EQ that comes with the Kemper
P.S If anyone wants to pass a donation to me (Not optional) then feel free to send me a PM - or paypal is firstname.lastname@example.org