Can anyone determine the fx in One from U2? IMO it's not a phaser or chorus
One
- theplayer
- Thread is marked as Resolved.
-
-
Sound like a Leslie (Rotary) to me ... Slow setting with the occasional burst of fast
-
Thanks Andy, I tried that one earlier but do you know how to vary in slow or fast? Is this a morphing thing with the rotary fx in the profiler?
-
how to vary in slow or fast?
You can assign a Remote I, II, III, or IV Footswitch to Rotary Speed in the Rig/Performance Slot.
-
Thanks Andy, I tried that one earlier but do you know how to vary in slow or fast? Is this a morphing thing with the rotary fx in the profiler?
I use MIDI CC #33 - this is specific to the slow/fast of the Rotary speaker. I use a momentary switch though it can be done with a latch.
-
I'm sorry but I'm not familiar with this. I use a midi footcontroller like this one for accessing my profiles and for controlling volume ranges with the pedal. So what do I need extra and does it mean a bunch of extra parameters and settings?
How can you vary with a (on/off ?) switch like you do with a pedal for e.g. wah.
-
Good pedal - I still have one
You can Edit the control pedal (and others) to suit your needs
If you have the manual then have a look at pages 19 & 21 -you should be able to use the CTL switch by setting it to CC#33
If you don't have the manual: http://www.synthmanuals.com/ma…ners_manual/fc-200_om.pdfSkål, Andy
This might also be of use - You can swap out the CC#11 (morph) for CC#33 (Rotor Speed)
-
Hi Andy_T-V, Great! Thanks. I will try this.
-
Aaaand ... you can use a footswitch connected directly to the KPA to control it ... System settings page 6/7