Solved: Latest RM+OS - Space Parameter stuck ON - Anybody?

audiogenx · Mar 6th 2020

I'm running the latest OS and the latest version of Rig Manager. Been using the Kemper for 7 years without issue. I'm on Mac using an Apollo.

The sound of all of the dry rigs, with all pre and post inserts empty, is affected by the Space parameter even though I have it all the way off.

It's happening on every profile in my Kemper and/or when switching profiles using RM.

Cranking up the Space parameter has no effect, presumably because it is stuck to 'full wet'. Turning it all the way down has no effect either..... same roomish sound mixed in.

This is driving me crazy. Is anyone else experiencing this issue?

**EDIT: It is not stuck to 'full ON' but there is no way to remove it completely. It's like it's stuck to 10 o'clock

audiogenx · Mar 6th 2020

I guess I should have posted this in the 'Profiler Related Issues' forum.

Sorry.

If so, please move it there. Thx

jfischer518 · Mar 7th 2020

I can say that I am currently having issues where my wah is always on when I go to some rigs. I have made sure that it is saved in the off state many times.

audiogenx · Mar 8th 2020

Well, after rebooting the Kemper both with and without Rig Manager open and rebooting my Imac Pro multiple times the problem has gone away.

Ghost in the machine?

Burkhard · Mar 11th 2020

Quote from jfischer518

I can say that I am currently having issues where my wah is always on when I go to some rigs. I have made sure that it is saved in the off state many times.

Does this happen at the start, and is a switch connected to the Remote and configured to switch the Wah effect on/off e. g. the toe switch of a Mission expression pedal?

In that case change the polarity of that switch to Inverse in the PROFILER menu.

jfischer518 · Mar 11th 2020

Quote from Burkhard

Does this happen at the start, and is a switch connected to the Remote and configured to switch the Wah effect on/off e. g. the toe switch of a Mission expression pedal?

In that case change the polarity of that switch to Inverse in the PROFILER menu.

I have the stage and the Mission pedal is always connected on startup. I have the toe swtich set to turn black 1 on and off.

Burkhard · Mar 12th 2020

And is the toe switch set to Normal or Inverse polarity in Pedal Settings? It should to be set to Inverse.

jfischer518 · Mar 12th 2020

Quote from Burkhard

And is the toe switch set to Normal or Inverse polarity in Pedal Settings? It should to be set to Inverse.

Mine was set to normal and is now changed to inverse. I will monitor and see how it behaves.

jfischer518 · Mar 13th 2020

Quote from Burkhard

And is the toe switch set to Normal or Inverse polarity in Pedal Settings? It should to be set to Inverse.

Quote from jfischer518

Mine was set to normal and is now changed to inverse. I will monitor and see how it behaves.

Two days of use and so far all is well, have not seen any negative behavior since the change

Share