How to Set Wah on The Profiler Floorboard using Mission Engineering SP1 Pedal

There are tutorial videos on our web-page demonstrating how to connect an expression pedal and set up a wah effect. It's also described in the manual.

Be aware, that you cannot use the toe switch of that pedal, because it's latching. The PROFILER requires momentary switches. Mission offers another model (EP-1 KP) with a momentary toe switch. But a toe switch isn't needed. You can use Pedal Mode "Bypass@Heel", "Bypass@Stop" or "Bypass@Toe" instead.

i personally much prefer usong the toe switch over the bypass@....... options. You could sinple change the toe switch to a momentary switch. It will cost you less than £5 and only requires a couple of solder connections so takes less than 10 minutes.