Solved: FCB 1010 with UNO4Kemper - Wah problem

  • Hi there!

    Altough I re-calibrated the exp pedals on my FCB 1010, the wah pedal seems to operate reversely. It does the high pass effect on heel position rather than toe. It works reverse! I could not find a way to fix it. I usually use the wah with the bypass @ heel mode. On the Pedal links page, it seems that the midi signal is ok. I meanthe wah pedal value is 0 at heel and 127 at toe. And the pitch pedal is engaged to the wah pedal. I tried all combinations of the top buttons on the pedal links page ( Wah Pedal > Vol, Morph Pedal > Wah etc) It just doesn't work. Please help!

  • Do you have Pedal Range for the wha set to a positive value?


     Pedal Range

    This parameter determines the maximum impact of the pedal, as an offset to the value selected for the “Manual” parameter. Negative values of “Pedal Range” will reverse the swell direction of the pedal or touch effect, so the effect will go down when you push the pedal forward.