I recently moved away from the Kemper and in the process of testing various amps I testing profiling a few amps. These are DI profiles so will require a cab (I used Wall of Sound)
There are 108 amp profiles. The amp was profiled from gain setting 2 up to 10 on all channels (12 in total).
Naming convention is straight forward:
Mar JVM CL A 02 = Marshall JVM410h on the clean channel set to Amber with gain set to 2.
I was personally very proud of these profiles and side by side, apart from only a tiny bit of additional gain, sounded better than the amp.
Yesterday, in an attempt to fall back in love with my Kemper, I made a few profiles of my JCM800. I did not take many as the amp to me sounded perfect with the gain at 8 and the master set at various levels.
Naming convention again is straight forward:
Marshall JCM800 M4 P8 = Marshall JCM800 with master at 4 and gain at 8.
There are no pedals in front of the amp so it is pure amp tone.
I would love some feedback. I was actually looking to become a commercial profiler at one point but not sure I have the skills for that.
Anyway download, distribute as you feel free and please provide a little feedback.