Are you using the speaker out to the Kab? The monitor out is not powered.
No, the monitor out controls the signal sent to both the monitor out and the speaker out.
I am getting no output to the mains - is there a setting I am missing?
The main outputs are not powered, and they do not have imprints.
Only the monitor (not powered) and speaker (powered) use imprints.
What are you connecting the mains to? A computer interface or mixer? Do you have the Main Output set to Master Mono or Master Stereo on the Output section page?
Your main out generally be for FOH mix for live or for recording, while your Kab using the powered speak out would be for your monitoring.
I have output going to the Kemper Kabinet. Set to Master Mono.
Are you guys saying I cannot run the powered output to the Kemper Kab with the speaker imprint?
No... You can absolutely go from your powered speaker output to the Kabinet and use imprints
So which output do I use?
Your powered speaker output should be on the upper half, on the left, on the back.
It has a red ring and is labelled 8-16ohms.
Thanks, that did the trick!
Good to hear, enjoy!
The real trick is reading the manual instead of stumbling through the errors. The Main Manual includes a chapter Kemper Kone / Kemper Kabinet. Reading those 5 pages is time well spent and most effective for everybody.
