Weird profiling issue (latest OS including beta)

  • I am using the latest OS including beta releases (don't remember what the current version is). I have made a bunch of profiles of my amp/cab combinations, but have never seen this issue before. I create a profile, like I always have, but this time I'm profiling a Warehouse Green Beret, which is a GreenBack clone. The profiling process goes through fine, but on 4 out of 7 of my profiles, the cabinet is turned off. Originally, I thought I might have hit the button by mistake while profiling. So, I tried again today, and made sure everything was set correctly. I made sure the current profile in browser mode was set to one that had a cabinet, just to eliminate any possible issues.


    After making 2 profiles at different mic positions, both show as no cabinet on the Kemper. I tried editing the profile in RM, but it won't let me add cabinet info.


    Anyone else see this happen to their profiles with the latest software?


    Is there a way around it?

  • Someone else had a similar issue last week. Support said that sometimes a very clean tone gets mistaken as a direct profile (I’m paraphrasing as I can’t remember the actual details). He reprofiled and it worked OK. I wonder if something has changed in the threshold for detecting DAP or Studio? Only speculating here though. I would contact support and let them know as it now looks like it might not be an isolated issue.

  • My process remains the same. I'm using an SM57, and/or E906, into a Mackie ProFX12 v3 (no FX, no EQ used on the board) back into the Kemper. All levels are set to around -6db on each channel. Kemper return has been tried at even -25db. The problem seems to be mainly with the Randall Grail Module into a 2X12 with Warehouse Green Beret speakers as well as another cabinet with V30s, but more predominant in the GBs.


    I tried profiling my Plexi Synergy module, and found that it seems to not like high gain sounds. It seems like this happens on any profiles over a Kemper gain level of 5 or 6. Below that threshold, the profile goes through fine. I will be running more tests in the coming days, and will update this thread with my findings.

  • I tried profiling my Plexi Synergy module, and found that it seems to not like high gain sounds. It seems like this happens on any profiles over a Kemper gain level of 5 or 6. Below that threshold, the profile goes through fine. I will be running more tests in the coming days, and will update this thread with my findings.

    I have been experiencing this with tones above 5 or so gain on the Kemper as well. I had a pedal in line when I had the issue so I am going to pull out a different amp and profile it with some gain dialed up in the amp itself to see if it does the same thing. If it does, I will be starting up a thread about what I am getting for results with more gain. All of my lower and no gain profiles sound good.