With the Kemper Remote or a Midi controller yes, on the unit itself I believe not. If you have a volume pedal connected, you can set it to switch the tuner on at heel (this is what I do)
Ah! Yes! Totally forgot about the switch. I bought a BOSS FS-6 a while back & never use it. Now I'll hook it up & use one of the switches to turn on the tuner!
Thanks a lot, man! ?
Pardon me if this is a dumb question. Can you have the Kemper's built-in tuner available as a buttom to push, as opposed to turning the chicken head knob?
literally a single monentary switch and a 'guitar cable' connected to the kemper can do this.
I would hope for a true envelope filter effect ala Mayer.
I would hope for a true envelope filter effect ala Mayer.
look at the “Touch” setting for the wah.
look at the “Touch” setting for the wah.
Yes, i tried that, but it's rather limited compared to a QTron.
1. Assign switch to turn Amp block on and off.
2. Input gate type and location in signal chain.
3. Synths.
4. Amp eq type changeable to graphic and studio.
5. Amp input boost added to amp section.
6. Some new effects that are different i.e.
Caitlinbred Anticthon
Caitlinbred Coralias
Blooper or Hex revolver
How about a Kemper Kombo amp? One twelve, with a second output jack for stereo to another Kab.
now your talkin!!!!!! light weight KILLER combo,,built in kone,,
My #1 request: Run Kones and imprints on main outs to keep monitor outs free for stereo loop
I posted this in Feature Requests thread some time back here: Speaker imprints available on Main Outs
QuoteWhen playing at home, I like to monitor in stereo through my 2x12 cab with Kemper Kones. That's great, but then there's no loop available for pedals on my Toaster since the send is used by the stereo monitor out -- and that is a real problem. For this reason, I would love to see an option to run the Kones/imprints on the main outs. Disabling the imprints on the monitor our would be OK then. To be clear, I run gain pedals into the toaster input, but I need a loop for time domain pedals after the amp block.
The *ideal* would be the ability to run Kone/imprints on the 1/4" outs (so that they could feed the power amp for the 2x12) and have the XLR main outs run with the regular cab profile for FOH. However, I assume that the 1/4" and XLRs must carry the same signal because of physical wiring within the profiler.
Android app with wifi, or Windows Rig Manager support over network
