I've been trying this for an hour without success, anyone know if it's possible and if so an idiots explanation would be appreciated!
Can I use this pedal to control the looper function?
- spottydog10
- Thread is marked as Resolved.
-
-
No, that is a signal switcher. You need two simple momentary normally open switches like the PROFILER switch 2-way.
You connect this to one of the PEDAL sockets of the PROFILER via TRS cable.
You select PROFILER Switch from the menu on the corresponding PEDAL configuration page.
You assign Looper Start and Looper Stop to the two switches A and B.
-
Thanks Burkhard, in the meantime could I use this?
Leem AB-10 AB box footswitch (soundhousegloucester.co.uk) -
Thanks Burkhard, in the meantime could I use this?
Leem AB-10 AB box footswitch (soundhousegloucester.co.uk)No, you can't use it. See what Burkhard recommend you:
No, that is a signal switcher. You need two simple momentary normally open switches like the PROFILER switch 2-way.
You connect this to one of the PEDAL sockets of the PROFILER via TRS cable.
You select PROFILER Switch from the menu on the corresponding PEDAL configuration page.
You assign Looper Start and Looper Stop to the two switches A and B.
Or you can use 2 separate switches like this one http://soundhousegloucester.co…s-5u-unlatched-footswitch
-
..or one of this
-
Thanks Chaps, ordered the Kemper one, Cheers!