First, you should let us know, which error comes up? You might take a photo of it and post it here or even better, send it to Support.
Timo
here is a pic https://dl.dropbox.com/u/39580456/2012-09-24%2018.36.39.jpg
I will send it to suport too
First, you should let us know, which error comes up? You might take a photo of it and post it here or even better, send it to Support.
Timo
here is a pic https://dl.dropbox.com/u/39580456/2012-09-24%2018.36.39.jpg
I will send it to suport too
I have exactely the same error message on my KPA after the update. The thing won't boot anymore. Seems to be something wrong there....
Boot times are almost doubled, was at around 30 seconds, now it's 1 minute per boot.
1.5 works fine here - with all my many profiles (currently 1202) in the Kemper.
Still around 30 sec here.
47 seconds
Did a flash format and it boot ok, but after i restore my backup it goes back to the same error
Hi there,
also had the error message when trying to update to 1.5
I´ve re-installed 1.1.1 (thanks to Armin´s recovery hints), cleaned every rig etc. with a "clean backup" and tried to update to 1.5 again: everything ok, update worked fine
Finally I checked my backup which I had taken prior to my update trials: man, I couldn´t believe I had 1894 rigs stored
Maybe a rig counter would make sense...?!
So I guess the problem with the update to 1.5 occurs if you have too many rigs stored (at least more than 1202 like Armin).
However, this was a good time to clean up my rigs
Best wishes to all of you,
Chris
I must say I'm very happy with the new way of trying out different cabs without having to save them first
WOW ... Shutdown Counddown added
All working fine here too.
btw my 1202 rigs need 1:09 to boot - like a good tube amp
btw my 1202 rigs need 1:09 to boot - like a good tube amp
Exactly the time for your tube poweramp to warm up.
here is a pic https://dl.dropbox.com/u/39580456/2012-09-24%2018.36.39.jpg
I will send it to suport too
add your last backup, too.
Timo
I downgraded to 1.1.1, made a backup and deleted around 330 files with 7-Zip. I restored the now lighter backup-files (I now have only 1672 rigs instead of 2007
After that the update to 1.5 worked.
It really seems to have something to do with the amount of profiles. With 1.1.1 I had occasional problems when the browse-knob would show an empty list and wouldn't load a different rig. I would have to change from "all rigs" to something else and back to make them show up again and also to make the rig-up/down buttons work.
So It might have something to do with the amout of rigs or the memory consumption.
Done the same all working now! btw this was good, now i have made a purge in my profiles list
Mine gave the green screen software error also after I loaded up 1.5. I will try to put 1.1.1 back on, clean things up and try again. I will report back later if I can get up and running again but seems like a fair percentage of people *on here* with issues.
Update1: I was able to downgrade easily with the instructions on Armin's site. Thanks Armin. I booted from the USB and had it burn 1.1.1 back with no issue. I tried going straight to 1.5 again but same issue. So now I am downgrading and then erasing the profiles before trying the upgrade again as maybe that is the issue like people are saying.
You guys probably noticed that the KPA now allows WDW (and more).This is a a good timing for a cool announcement that you will see in a few weeks..May be before that ;.Some of you guys are already aware of it
For all who wants to play WDW...Stereo or mono... all possibilities in one box..stay tuned
You guys probably noticed that the KPA now allows WDW (and more).This is a a good timing for a cool announcement that you will see in a few weeks..May be before that ;.Some of you guys are already aware of it
For all who wants to play WDW...Stereo or mono... all possibilities in one box..stay tuned
Ehh....forgive the ignorance, but WDW = ???
Ehh....forgive the ignorance, but WDW = ???
Wet-Dry-Wet