you hit the limit you can not add past 1000

There is no such animal. You would need to build one.

windows 11 never a problem (Probley Jinxed myself)

If you are using RM I would setup a folder under presets then drag and copy the cabs, amps or what ever EFX preset you like. Then you can drag it into any EFX slot, amp or cab that you want to change.

might be your workstation

Windows

The 260-character path limit is due to fixed buffers in the runtime library for DOS/Windows path processing (e.g. ANSI <=> Unicode, working directory, and DOS<=>NT path conversion).

The path is the location on your hard drive where the file exists. Windows has a limit of 260* characters, OneDrive supports up to 400 characters in most cases and MacOS can support up to 1024 characters or more.

yep what whippinpost91850 said

Never had a issue with updates I do them through RM and a PC. By the way I gig every week.

Quote from Wheresthedug

Not quite.

The pure cab setting that gets used is the higher of the two. If the cabinet is set to 2 and output to 3 then the output setting of 3mgets used. If the cabinet is set to 5 and output to 3 then the cabinet setting of 5 gets used.

It's what I said just a different way... still the same result

Check pure cab it is on in the Output section by default and set to 3

It should be turned off.

If you set Pure Cab in the Stack/CAB below 3 the setting in the Output section will override and you still have a setting of 3 for Pure Cab.

I usually turn it off in the Output and set it the Stack/CAB

rig packs and effects are baked into the firmware now with each new update.

around 11/2020

A/B switch

my set up is 2x12 FRFR.

SPX SE direct into speakers for BTracks

KPA into FRFRs to monitor myself

KPA to FOH

IEM wireless back from FOH

(With control of own full monitor mix)

Covers and delivers anything I put into it.

Simple and clean.

The App does what it does anything past that will require the iOS to download and store all Rigs, Profiles, and such on the iPad plus Sync all between iOS, Your profiler, and what MAC/PC you are using every time. I use iOS on gigs and at church. Tweak then hit the store done.

At home, I use RM for more in-depth editing. Every software has its limitations.

But we as humans expect electronics and software to be perfect yet we design them and we are not perfect.

why does it suck it was explained what it can and cannot do. Every software sucks,haven't meet a platform that didn't and I use the 3 main ones Win 11,

MAC and iOS. Learn how it works and make it work for you. I use iOS on gigs to tweak if I need to on a gig. What you tweak at home will suck live. Profiles need to be tweak in a full, loud band setting. Most of my fiddling at home never sounds good live.

it means you're shouting which is rude.

the string is right but it must be written and sent in this order

to turn off

F0 00 20 33 00 00

01 00 0A 02 00 00

F7

turn on

F0 00 20 33 00 00

01 00 0A 02 00 01

F7

This gets you into the NPRN range

F0 00 20 33 00 00

This gets you your address page 11 for the amp stack (0x0A) =0A

0A amp stack

02 on/off

01 00 0A 02 00 00 =off

01 00 0A 02 00 01= on

F7 is at the end of the string.

I used MIDI Wench to get the code

the string must be written as is in the above example

There should be one to fix the mid control in the Metal EQ does not work. Burkhard mention it in another thread.

SKB 3i-2015-7KPS iSeries Kemper Profiler Stage Case not sure of price overseas. About 200 $US.

Travels well by air

Variax and the Peavey AT-200 can give you different tunings and transpose.